Manual Allen-Heath GL-2 (page 13 of 16) (English)

541389

Zoom out

Zoom in

1/16

GL2

ON-STAGE MONITOR

mic

splitter

AMPLIFIERS

EFFECT

insert

inserts

down

POST

Graphic equalisers plugged into the console inserts are an invaluable aid to reducing

on-stage acoustic feedback and enhancing the clarity of the monitors. Using the

inserts allows the stage engineer to check the operation of the equalisers in his wedge

monitor. It is best to use the same type of loudspeaker for the engineers monitor as

the stage monitors.

Set up the WEDGE MIX by selecting one

or a combination of the group/L/R AFL

(monitor 1 to 6) switches to listen to the

desired stage monitor outputs. These are

post insert (post graphic EQ) and post

output fader for accurate monitoring.

Pressing any PFL switch automatically

overrides the selected AFL source to allow

channel setup and signal checking.

ENGINEERS WEDGE MONITOR

STAGE MONITORS

Set the MONITOR MODE

switch to the down position

(below panel) for the wedge

monitor output (AFL

interrupted by PFL).

These switches are recessed

to avoid accidental

operation. Set using a pen

tip or pointed object.

Set the REV switches to

the down position to route

the aux mix through the

main outputs to provide the

stage monitor sends.

to FOH

console

EQUALISERS

On-stage mixing system for local control of performers monitor loudspeakers (wedges)

With dedicated output for the stage engineers wedge loudspeaker.

This example shows the 6 aux sends routed

through the main outputs to provide 6 inde-

pendent stage monitor mixes with metering,

mutes, AFL, inserts and balanced XLR connec-

tors.

The REV switches reroute the groups and L-R

mix to the aux jack outputs for additional moni-

tor or effects sends, or as an independent submix

facility. For example the aux 5 and 6 jack

outputs may provide a separate stereo mix out-

put fed from the channel L-R switches and the

additional 4 return line inputs.

To add effects such as delay or ADT to the stage

monitors the signal/s may be routed to a group

(available at the aux jack output), using the

master LEV to control the send level, and

returning the effect to an unused channel using

the aux send controls to set the required amount

of effect to each monitor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL-2 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allen-Heath GL-2 Manual

Product: