541389
5
Zoom out
Zoom in
Previous page
1/16
Next page
GL2
SPECIFICATION
INPUTS:
MIC IN ............................ XLR............................ pin 2 hot, 3 cold balanced .......... 2 kohms ........... variable -60 to -10dBu
LINE IN .......................... XLR............................ pin 2 hot, 3 cold balanced .......... 10 kohms .........variable -40 to +10 dBu
or 1/4" JACK .................. tip hot, ring cold balanced .......... 10 kohms .........variable -40 to +10 dBu
STEREO IN A ................1/4" JACK .................. tip hot, ring cold unbalanced ...... 20 kohms ......... variable -20 to +22 dBu
STEREO IN B ................ RCA PHONO....................................... unbalanced ...... 20 kohms ......... variable -20 to +22 dBu
RETURN IN ...................1/4" JACK .................. tip hot, ring gnd unbalanced ...... >10kohms ........ variable -10 dBV min
2-TRACK RETURN ....... RCA PHONO....................................... unbalanced ...... >6 kohms ......... -10 dBV
INSERT RETURN.......... 1/4" JACK .................. tip send, ring retunbalanced ...... >6 kohms ......... -2dBu
CONNECTIONS
Width............... 19.0" standard 19" rack .......... (483mm)
Height .............. 19.2" 11U rack space ............. (488mm)
Depth ............... 3.5" ........................................... (90mm)
weight .............. 21lbs ................... (10.5kg)
packed ............. 28lbs ................... (13kg)
CONSTRUCTION: All metal chassis.
Standard 19" rack mount in 11U space.
Single front panel with individual removable circuit assemblies.
Removable base for service access.
Removable internal power supply unit.
POWER REQUIREMENTS: 50/60Hz 40W max
Mains voltage set for local requirements.
PHANTOM POWER: +48V DC 50mA
Channel XLR inputs individually switched
FREQUENCY RESPONSE: 20Hz to 20kHz +0/-1dB
DISTORTION:. THD 0.01% Line in to mix out at 1kHz
CROSSTALK: . output mute better than 100 dB at 1kHz
channel mute better than 90 dB at 1kHz
fader shutoff better than 90 dB at 1kHz
NOISE: ............ 22Hz to 22kHz
MIC EIN -127.5 dB into 150 ohms
LINE pre-amp at 0dB -88 dBu
MIX noise -85 dB ref 0VU
OUTPUTS:
L-R OUT ........................ XLR............................ pin 2 hot, 3 cold balanced .......... 50 ohms ...........+4 dBu +27 dBu max
MONO OUT ................... XLR............................ pin 2 hot, 3 cold balanced .......... 50 ohms ........... +4 dBu +27 dBu max
GROUP OUT ................. XLR............................ pin 2 hot, 3 cold balanced .......... 50 ohms ........... +4 dBu +27 dBu max
AUX OUT .......................1/4" JACK .................. tip hot, ring gnd unbalanced ...... 75 ohms ........... variable +21 dBu max
2-TRACK SEND ............ RCA PHONO....................................... unbalanced ...... 1 kohm ............. -10 dBV
INSERT SEND............... 1/4" JACK .................. tip send, ring retunbalanced ...... 75 ohms ........... -2 dBu .+21 dBu max
MONITOR OUT .............1/4" jack ..................... tip left, ring right unbalanced ...... 100 ohms ......... variable +21 dBu max
PHONES OUT ............... 1/4" jack ..................... tip left, ring right for stereo headphones 8 to 400 ohms
INTERNAL OPERATING LEVEL: -2 dBu
INTERNAL HEADROOM: ............ +23 dB
MAX OUTPUTS: .......................... balanced +27 dBu 600 ohms max load
unbalanced +21 dBu 2kohms max load
All console inputs and outputs are in-phase except for the GROUP INSERTS
METERS: ..................................... Peak responding bargraph
0VU = +4dBu at XLR outputs
PEAK LEDs:................................. Turn on 5dB before clipping
SIG LEDs: .................................... dynamic responding Turn on at -20dBu
0 dBu = 0.775 Volts RMS
0 dBV = 1 Volt RMS
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL-2 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info