707244
53
Zoom out
Zoom in
Previous page
1/56
Next page
53
6.3 USING MULTIPLE BABY UNITS:
To make the use of multiple baby units easier, you can assign real
names to the baby units instead of ‘baby-1’, ‘baby-2’, etc. For this, see
paragraph 5.4.
When all babies are sleeping and the baby units
are all set to sleep mode, the parent unit will first
show the status of baby unit 1 (temperature, battery
indication, night light or lullabies are switched in,
etc.), after 15 seconds the status of baby unit 2, then
unit 3 and finally unit 4. This cycle is repeated for as
long as all babies are sleeping (or quiet).
- Unregistered baby units will be skipped.
- When a baby unit is registered, but not in communication with the
parent unit (out of range, empty battery, switched off), the parent unit
will emit a warning signal. Only after the cause for this out-of-range
notification is cleared, will the parent unit switch over to the next baby
unit.
As soon as one of the babies starts crying, the parent unit will instantly
indicate the sound and status of the baby unit where the crying is
coming from. Don’t forget that baby unit 1 always has the priority; this
means that when all babies are crying, the parent unit will indicate the
status of baby unit 1. The sequence is: baby-1, baby-2, baby-3, baby-4.
- When several babies are crying, the status of
the first crying baby will be shown (see above
sequence) in the display, but the display will
indicate that another baby is crying.
You can now briey press the button to switch priority and check the
status and sounds of Angel (in the situation mentioned above).
For each baby unit, you can turn the night light on or off, turn the
lullabies on or off and activate the feeding timer (feeding intervals are
the same for all baby units). For turning these functions on or off and
talking back to the baby unit, the parent unit must be in communication
with the concerned baby unit (the name of this baby unit must be shown
in the display).
6.4 DEREGISTERING:
Defective baby units or units no longer in use must be erased from
the parent unit’s memory to prevent the parent unit from constantly
indicating an out-of-range error for that baby unit.
You can do this by re-registering the baby units that are still in use. Only
the baby unit you’re no longer using should not be re-registered.
It is not possible to deregister a specific baby unit at the parent unit.
Brian is crying, his status is indicated and you’ll
hear the sound
Angel is also crying
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DBX-63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-63 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info