707244
52
Zoom out
Zoom in
Previous page
1/56
Next page
52
5.6 ALARM TONE:
You can set the unit to emit a clear alarm tone when temperature limits are
exceeded, when the battery is low or when the baby unit is out of range. You
can turn this function on or off as follows:
1. briey press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option ALARM
TONE
4. briey press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briey press the button to conrm you selection and to leave the
menu
will appear in the display when the alarm tone is switched off
this setting only turns the alarm tone on or off; the alarm itself is not
changed
when the alarm tone sounds, you can turn it off by briefly pressing the
button
this does not turn off the feeding time alarm
5.7 VIBRATION FUNCTION:
If you’re carrying the parent unit with you in a noisy room (e.g. while vacuum
cleaning) or you don’t want sounds from the parent unit bothering other
people and you have set the volume to 0, you can switch on the vibration
function:
1. briey press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
VIBRATION FUNCTION
4. briey press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briey press the button to conrm you selection and to leave the
menu
will appear in the display when the vibration function is switched on
6 EXPANSION
The DBX-62 is capable of registering up to 4 baby units. This way you
can monitor 4 babies and because you can assign an individual name to
each unit, you can directly determine which child is crying. Additionally,
for each baby unit you can set the talk-back function, feeding timer, room
temperature, lullabies and night light.
6.1 CODING SWITCH:
In the battery compartment you’ll find a coding switch with 4
positions corresponding with baby units 1, 2, 3 and 4. Make
sure to set an individual code for each baby unit.
6.2 REGISTERING:
Upon expanding, you must register (re-register) ALL baby units,
also the baby units that were already registered.
Preparation:
Both the parent unit and baby unit must be switched off (parent unit: briefly
press and hold the button until the display is completely blank, baby unit:
slide the power switch to the OFF position), but the power supply (adaptor
or batteries) must be connected).
1. press and hold the TALK button on the rear of the parent unit
2. now press and hold the button for approximately 3 seconds until the
parent unit turns on and P/PAIRING appears in the display with the P
ashing. Now release both buttons
3. press and hold the + button on the baby unit
4. now slide the power switch to the ON position, the red light will turn
on, and release the + button
5. briey press the button, the display of the parent unit will show
‘PAIRING BABY X (*) OK and you’ll hear 2 beep tones from the baby
unit you just registered
6. repeat instructions 3, 4 and 5 for the other baby units
7. nally, turn the parent unit and all baby units off and back on
8. the registration is now complete
*: X = 1-4, corresponding to the position of the coding switch
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DBX-63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-63 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info