228448
6
Zoom out
Zoom in
Previous page
1/9
Next page
Accept incoming calls and adjust receiving volume
By once pressing the talk button at your Bluetooth
TM
headset you can take over a call with your
wireless headset. Switch-over will always take a short moment. During switch-over you will hear a
short melody.
Adjust the earphone volume by pressing the volume buttons or of the headset according to
your wishes. You may also feel the volume keys with your fingers: The key with one dot reduces the
volume, while the key with 2 dots will increase it. This adjustment will have no effect on the volume
of the microphone! This volume is automatically adjusted by the volume of our own voice and the
integrated DSP (digital signal processor).
After finishing your call do not forget to put back your handheld receiver, otherwise the line might still
be occupied thus creating unnecessary costs!
Important advice for transmission range:
The Bluetooth headset has an averange range of about 10m. This range can be influenced by your
surroundings. Electronic appliances close to your telephone may reduce range whereas a free area may even
increase it.
In case your Bluetoothheadset has lost connection to your telephone just press the center button
at your headset to reconnect. In case this does not work, just switch your headset off for a short moment and
on again before pressing the center button at your headset.
Pairing between Bluetooth
TM
Headset and Audio-Gateway
According to the international Bluetooth
TM
standards and agreements your headset ist able to establish a
reliable and safe audio transmission to a lot of different devices using the Bluetooth
TM
technology.
Your headset comes factory programmed („paired“) and ready for use with the individual audio-gateway
supplied together as a set. If you want to connect the headset with other Bluetooth
TM
devices (e.g. mobile
phone), or if you have already used your headset with another device, you must repeat the pairing procedure
before reconnection to your audio-gateway.
In such a pairing procedure, headset and partner device must exchange informations and security data,
before they can mutually acknowledge themselves as partner units. This procedure, which includes a reset, is
defined as pairing“. Important: Only paired devices can communicate with each other, there is no
comminication possible with a third device at the same time. For pairing with other devices please read the
last chapter of this manual.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht bt 2000 bluetooth at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht bt 2000 bluetooth in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Albrecht bt 2000 bluetooth

Albrecht bt 2000 bluetooth User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info