228448
3
Zoom out
Zoom in
Previous page
1/9
Next page
Hardware requirements for existing telephone and safety advice:
Almost all wired telephones with a conventional handset and a plug-in handset cable can be connected.
Today nearly all modern home- and office telephones are equipped with a plug-in receiver cable (4 pin
Western” sockets). The BT 2000 only replaces the microphone and the earpiece of your telephone handset
so that you can move around within a range of several meters of your work place without any cables. You
can use the BT 2000 at analogue as well as ISDN- or proprietary telephone systems.
The following telephones can not be connected:
Designer telephones where additional electronic devices (i. e. buttons, displays) are installed in
the handset
Telephones with carbon, dynamic or piecoceramic microphones (mostly older models) which are
not yet equipped with state-of-the art electret microphones
Telephones with special handsets
In case of doubt please contact the company that services your telephone system. Please use only
the supplied accessories. Operate the audio gateway only in connection with the specially designed
wall charger, other chargers may damage the set or cause undesired effects on the telephone line.
Never open the headset or try to change or even open the lithium battery by yourself!
Hint: The headset can also be connected with other appliances equipped with Bluetooth technology such
as mobile phones and future DECT-telephone systems with Bluetooth™ technology. In this case the audio
gateway will only be used to plug in the headset for charging, the handset cable connectors will remain
unused. Pairing has to be done according to the manuals of the respective manufacturer. Observe the
relevant chapter at the end of this manual.
Connecting the audio-gateway to your existing telephone
Unplug the cable of the handset you
presently use and insert it in the lateral
socket of the audio gateway (1).
Plug in one end of the supplied straight
telephone cable in the now free socket of
your hand receiver, the other end plug in the
free socket at the bottom of your audio
gateway. You can lead the cable outside via the
2 slots in the plastic. (2)
Connect the DC plug of the wall charger with
the socket marked „DC 5V at the right side
1
2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht bt 2000 bluetooth at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht bt 2000 bluetooth in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Albrecht bt 2000 bluetooth

Albrecht bt 2000 bluetooth User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info