630557

Akai SynthStation Manual

9
Zoom out
Zoom in
Previous page
1/11
Next page
playing, you will hear the entire Sequence but only see its Measure 3. When Sequence
3 begins playing, you will hear the entire Sequence but only see its Measure 3.
You can change the measure you are viewing with the BACK or FORWARD buttons in
the TRANSPORT tab. (When Chain Mode is deactivated, the current Sequence will be
looped during playback. In this case, each measure will be shown in the grid as it is
playing.)
Creating/editing a Sequence:
(1) Touch BACK or FORWARD to select a Sequence to create/edit. The Sequence ("S")
and measure ("M") numbers are displayed on the left.
(2) Touch the part of the Sequence you want to create/edit (DRUM, SYNTH 1, SYNTH
2, or SYNTH 3).
(3) In the grid, the horizontal axis represents one measure of the current Sequence,
divided into 16th notes. The vertical axis represents the range of notes used in the
Sequence. (You can shift the visible section of the keyboard by touching and sliding it
up or down.)
-- To place a note on the grid, touch an empty square.
-- Touching any occupied square will delete that note.
-- When creating Synth parts, you can touch and slide your finger to extend the
note, causing it to sustain. The sustained part of the note will be shown as a gray
bar on the grid.
-- When creating mono Synth parts (SYNTH 2 and SYNTH 3), you can make
legato notes by creating an sustained note (as mentioned above) then creating
another note above or below the gray bar.
(4) When you are finished with your current Sequence, touch BACK or FORWARD to
select another Sequence, or touch MENU to go to another page.
Note: SYNTH 1 is polyphonic (multiple notes can sound simultaneously) while SYNTH
2 and SYNTH 3 are monophonic (only one note can sound at a time). When creating
mono Synth parts (SYNTH 2 and SYNTH 3), you can make legato notes by creating an
sustained note (as mentioned above) then creating another note above or below the
gray bar.
TEMPO
The Tempo Page lets you set the playback tempo for the current Sequence. You can do
this one of two ways:
TAP TEMPO: You can tap the TAP TEMPO button at the desired tempo, and the
software will automatically detect the BPM reading and display it above. For more
precise detection, increase the setting of the TAP AMOUNT slider on the left, which
determines how many taps are required to derive a tempo.
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai SynthStation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai SynthStation in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info