630557

Akai SynthStation Manual

8
Zoom out
Zoom in
Previous page
1/11
Next page
To adjust the point on the X/Y controller, touch anywhere on the pad and the point will
"jump" to that point. You can also touch and slide the point for finer adjustments. To
create a "patterned" modulation, you can touch and slide the point then release it to set
it in motion. It will remain in motion – likely ricocheting around the X/Y pad – until you
touch the pad to set it in one place again.
The Joystick controller allows you to move the point within a circular area (as opposed
to the rectangular X/Y pad).
You can also set the Joystick so the point automatically snaps back to center after you
release it from any point. To do this, touch the SNAP button, which will light when this
function is activated. You can adjust the speed at which the point moves back to the
center with the RETURN SPEED slider.
SYNTH EDIT
The Synth Edit Page allows you to adjust the modules in your Synths. The first screen
of the page shows you the 12 available modules. Touch one to enter it. To return to the
main Synth Edit Page, touch the BACK button or double-tap an area with no
buttons/sliders.
To adjust faders, touch anywhere along the fader line to make it "jump" to that point or
touch and slide a fader to adjust it. To adjust knobs, touch the knob and slide up or
down. To reset a knob, double-tap it.
You can change which Synth you are editing from any screen by touching the
TRANSPORT tab then touching SYNTH 1, SYNTH 2, or SYNTH 3.
GRID EDIT
The Grid Edit Page lets you edit your Sequences, one measure at a time, in grid format.
To select which measure or Sequence you are editing, touch the BACK or FORWARD
buttons to scroll through them.
Note: While playing a Song in the Grid Edit page (with Chain Mode activated), the grid
will only show one measure of each Sequence (though it will actually play every
measure), and that number measure will be the only one shown in each Sequence that
follows.
For instance, if you play a Song and are viewing Measure 3 of Sequence 1, you will
hear Sequence 1 playing normally but only see Measure 3. When Sequence 2 begins
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai SynthStation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai SynthStation in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info