Manual Airis SRV200 POWER SERVER (page 70 of 73) (English)

475088

Zoom out

Zoom in

1/73

AIRIS POWER SERVER

User Manual Rev 1.0

Appendix A

PPTP VPN (W2K and XP only)

Important:

Make sure that the subnet of your Appliance is different the network you are

trying to connect from. For example: User’s office IP addresses are

192.168.1.x, set your Appliance to 192.168.2.1 Netmask 255.255.255.0.

Make sure that you have created a user account and password on the

Appliance for the users that you want to allow VPN access.

Proceed to your appliance’s PPTP Settings under VPN Settings.

1. Enable the Server

2. Enter a server IP, a number from 2-254 that is not being used by any

computer on the Appliance network. Usually 200 is a safe number.

3. Enter a range of IP addresses that users logging into the Appliance

will be assigned. Usually 201-210 is ok. Again make sure that there

are no computers on the Appliance network using the IP addresses

in this range.

4. Select Apply.

From the remote computer:

1. From the start menu: Select Settings -> Network and Dial-up

Connections -> Make a new connection.

2. Click Next on the wizard and select Connect to a private network

through the internet. Click on Next.

3. Select Do not dial…..Click Next

4. Enter the host name. This should be a static IP if you have one. If not,

then set up a DDNS account before continuing. This is where the

Appliance can be found on the Internet. Click Next.

5. Select if you want to create this connection for all users on your

remote network or just for the one computer. Click Next.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airis SRV200 POWER SERVER in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airis SRV200 POWER SERVER Manual

Product: