685624
15
Zoom out
Zoom in
Previous page
1/96
Next page
15ENGLISH
After choosing the fan speed as
“Auto Fan, “High”, “Mid or “Low,
the corresponding fan speed
indicator light will illuminate.
Under Auto and Dry mode, you
can not select the fan speed.
Dry mode DEACTIVATE WIFI MODULE:
Selecting fan speed
Auto mode
Always have the exhaust hose attached
in this mode.
When you set the air conditioner in Auto
mode, it will automatically select cooling,
heating (inapplicable for cooling only
models), or fan only operation depending
on what temperature you have selected
and the room temperature. The air
conditioner will control room temperature
automatically round the temperature
point set by you.
Under AUTO mode, you can not select
the fan speed.
1. Press the “Modes” button until the
“Auto mode” indicator lights.
After the “Auto mode” is selected the unit
will run automatically according to the
actual room air temperature.
In this mode you do not need to use the
exhaust adaptor hose, BUT the water
collected must be discharged. See 7.3
Drainage Section.
holding theConnect button” and -
synchronously 3 seconds. Press the
Connect buttonagain to activate the
10 seconds for the module to initiate again.
If the display readsA5”, the room
temperature sensor has failed. Contact
your Authorized AEG Service Centre.
If the display readsE5”, the evaporator
temperature sensor has failed. Contact
your Authorized AEG Service Centre.
If the display reads “E7”, the indoor motor
has failed. Contact your Authorized
AEG Service Center.
If the display reads “E4”, the display panel
communication has failed. Contact your
Authorized AEG Service Centre.
If the display reads “P1”, bottom tray is full.
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away. Restart the machine
until theP1” symbol disappears. If error
repeats, call for service.
You can select the desired fan speed, by
pressing the “Fan speed” button. The fan
speed will change in the sequence: “Auto
Fan”, “High”, “Mid”, “Low”.
7.2 Fault code
1.
Press the “Modes” button until the
“Dry” indicator is lit.
2.
The fan will run at low speed and
the display will show the room
temperature.
3.
Keep doors & windows closed
for
4.
Connected drain hose. See Drainage
section.
1.
2.
3
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG PX71-265WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG PX71-265WT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info