551733
4
Zoom out
Zoom in
Previous page
1/11
Next page
4 AEG installation manual
inlet vavle
seal
1/4”- 1”
(5–25 mm)
90° elbow
pipe
long screw
short screw
low voltage cable
mounting bracket
Installation of the Wall Inlet Valves
If the Structures of the House Prevent Tubing Routing
This can be avoided by making slots as shown in the fi gure below.
Supporting structural elements of the house should not be slotted. If you
cannot attach the mounting bracket properly to the batten wall, you can
install a separate mounting board.
For the installation, you will usually need the following parts:
90° elbow
Mounting bracket
Inlet valve
Wall Installation of the Inlet Valve
A typical wall inlet valve installation is shown in the fi gure on the right.
A 90° inlet elbow is used in the wall installation to prevent long objects
entering into the tubing system, protecting it against blockages.
A 90° steep elbow can be fi tted in two different ways. In practice, the
partition wall can be as narrow as 2 3/4” (65mm).
If the thickness of the wall board is more than 1” (25mm), you can reach
the mounting bracket by using an extension tube.
Note! When installing the short version of the 90° inlet elbow, use
short screws so that they do not extend into the tube.
choose the best angle
of the 90 ° inlet elbow
so that it fi ts best in
the surrounding space
open cavity
oor
wall
wall
90° sweep elbow
inlet valve
mounting bracket
min. 2 3/4”
(65 mm)
mounting board
mounting bracket
wall
sweep elbow
Note! A 90° inlet elbow must not be installed anywhere else in the tubing
system.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Oxygen - K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Oxygen - K in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Oxygen - K

AEG Oxygen - K User Manual - English, German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info