636052
266
Zoom out
Zoom in
Previous page
1/266
Next page
D
PK-232 MBX OPERATING MANUAL COMMAND LIST
COMMAND MNEMONIC FUNCTION
RWWhdlc OFF Starts Raw HDLC mode
RBaud 45 bauds (60 WPM) Sets the Baudot RTTY baud rate selection
Rcve Immediate Command Selects the receive mode Morse/RTTY/AMTOR
RECeive $04 <CTRL-D> Selects the Receive character used in text
REDispla $12 <CTRL-R> Re-displays current terminal input buffer
RELink OFF Re-connects after link fails due to retries
RESET Immediate Command RESETs PK-232 and bbRAM to factory defaults
RESptime 0 Sets the minimum delay before sending an ACK
RESTART Immediate Command Restarts PK-232, same as turning power off/on
REtry 10 Sets the maximum number of packet repeats
RFec ONReceives FEC in AMTOR Standby
RFRame OFF Checks RTTY characters for framing errors
RXRev OFF Reverses the received data mark-space sense
SAmple Immediate Command Enters the raw data sampling mode
SELfec Immediate Command Starts a selective FEC call with SELCAL
SEndpac $OD <CTRL-M> Sets the converse mode "Send packet" char.
Slgnal Immediate Command Starts the Signal Identification mode
SLottime 30 Sets the P-persistent CSMA slot time
SQuelch OFF Sets the receiver squelch carrier polarity
SRXall OFF Allows reception of ALL received SELFEC calls
STart $11 <CTRL-Q> Sets character to start sending terminal data
STOp $13 <CTRL-S> Sets character to stop sendina terminal data
TBaud 1200 bauds Sets the ASCII terminal data rate
TClear Immediate Command Clears the transmit Buffer (Non-packet modes)
TDBaud 96 Sets the receive data rate for TDM signals
TDChan 0 Sets the receive channel for TDM signals
TDm Immediate Command Enters the TDM receive mode
TIme S14 <CTRL-T> Inserts the time (in DAYTIME) in text
TMail OFF Enables AMTOR and Pactor Maildrop
TMPrompt (see text) Sets an 80 character AMTOR Maildrop Message
TRACe OFF Enables a Hex dump of received data
Trans Immediate Command Enters the Transparent data mode
TRFlow OFF Enables software flow control RX in Trans.
TRIes 0 (zero). Displays or forces packet retry counter
TXDelay 30 Sets the PTT key-to-data delay (X10 ris)
TXFlow OFF Enables software flow control TX in Trans.
TXrev OFF Reverses transmitted mark-space data sense
UBit 0 Controls seldom used ON/OFF commands
UCmd 0 Controls seldom used numeric commands
Unproto CQ Sets the UI packet frame sending Path/address
USers 1 Sets allowed number of packet multi-connects
USOs OFF Sets RTTY 'unshift on space’
VHF ONSelects VHF Packet - wide (1000 Hz) shift
WHYnot OFF Displays reason why packet not displayed
WIdeshft OFF Selects RTTY- wide or narrow (200 Hz) shift
Wordout OFF Sets Word output in RTTY/AMTOR/Pactor modes
WRu OFF Enables auto-answerback (AAB) in RTTY/ASCII
XBaud 0 Sets 8530 baud rate to receive Baudot/ASCII
XFlow ONSets Software (XON/XOFF) RS-232 flow control
Xmit Immediate Command Starts sending Baudot/Morse/FAX transmission
XMITOk ONAllows transmitter PTT line to be keyed
XOff $13 <CTRL-S> Sets character to stop sending received data
XON $11 <CTRL-Q> Sets character to start sending received data
ZFree Immediate Command Returns number of blocks of available memory
ZStatus Immediate Command Returns status of several internal parameters
4
266


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info