636052
265
Zoom out
Zoom in
Previous page
1/266
Next page
D
PK-232 MBX OPERATING MANUAL COMMAND LIST
COMMAND DEFAULT FUNCTION
MDCheck Immediate Command Allows you to check into your own MailDrop
MDigi OFF Monitors packet frames that you digipeat
MDMon OFF Monitors stations using your MailDrop
MDPrompt (see text) Sets an 80 character MailDrop message prompt
MFIlter $80 Filters received ASCII characters
MFrom ALL (calls) Monitors packets FROM other packet stations
MHeard Immediate Command Displays call packet signs heard
MId 0 Enables a Morse ID to be sent in packet
MMsg OFF Enables the MailDrop sign on message
Monitor 4 (UA DM C D I UI) Sets the packet Monitor mode level (0-6)
MOrse Immediate Command Starts the Morse mode, unlock speed
MProto OFF Enables monitoring of all packet protocols
MRpt ON Shows digipeaters in packet headers
MSPeed 20 Sets the Morse speed in WPM (5-99)
MStamp OFF Time-stamps monitored packet frames
MTExt (see text) Sets a 120 character MailDrop sign-on message
MTo Empty; enter calls Monitors packets TO other station callsigns
MWeight 10 Sets the Morse transmit dot weighting
MXmit OFF Monitors transmitted packet frames
MYAlias None; enter yours Sets the alternate MYCALL for digipeating
MYALTcal Empty; enter yours Sets the alternate AMTOR SELCAL
MYCall PK232; enter yours Sets YOUR packet call sign (MUST BE ENTERED)
MYIdent None; enter yours Sets your CCIR-625 7-character AMTOR SELCAL
MYMail None; enter yours Sets your Packet MailDrop callsign
MYPTcall None; enter yours Sets your Pactor callsign
MYSelcal Empty; enter yours Sets your AMTOR SELCAL, 4 letters
NAVMsg ALL Determines which NAVTEX messages you monitor
NAVStn ALL Determines which NAVTEX stations you monitor
NAvtex Immediate Command Starts the NAVTEX/AMTEX receive mode
NEwmode ON Returns to Command mode at disconnect
NOmode OFF Sets NO mode changes (eg. cmd: to CONVERSE)
NUCr OFF Sends Nulls to terminal after <CR>
NULf OFF Sends Nulls to terminal after <LF>
NULLs 0 (zero) Sets the number of for NUCR and NULF
Nums Immediate Command Forces FIGS case in Baudot, AMTOR and TDM
OK Immediate Command Transfers to mode after Signal Identification
Opmode Immediate Command Displays current PK-232 operating mode
PAcket Immediate Command Starts the Packet Mode
PACLen 128 Sets the number user data bytes in a packet
PACTime AFTER 10 Sets the packet automatic transmit timer
PACTor Immediate Command Enters the Pactor mode (PT for short)
PARity 3 (even) Sets the terminal vrogram parity (0-3)
PASs $16 <CTRL-V> Sets the converse mode pass character
PASSAll OFF Ignores CRC in receiving packets (Junk mode)
PErsist 63 Sets the P-persistent CSMA threshold
PPersist 014 Selects P-persistent CSMA operation
PRCon OFF Enables a parallel printer you have connected
PPFax ON Prints received PAX to parallel printer
PRout OFF Sends all received data to parallel printer
PRType 2 (Epson) Sets the graphics emulation for FAX printing
PT200 ON Allows 200 bauds for Pactor if link is good
PTConn Immediate Command Starts a Pactor connect with (CALLSIGN)
PTHuff 0 Selects Pactor data compression (0 = OFF)
PTList Immediate Command Starts the Pactor Listen mode
PTOver $1A <CTRL-Z> Sets the Pactor link direction change char.
PTSend Immediate Command Starts the Pactor unproto send mode (call CQ)
3
265


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info