429060
1
Zoom out
Zoom in
Previous page
1/2
Next page
DESCRIPTION
The Y-Cable Splitter connects two optical devices to a single fiber
span, or routes a single optical signal onto two different fibers.
The Y-cable can only transmit one signal at a time (does not
provide a multplexing function), so use with two optical devices
is best accomplished in a redundant configuration where only
one device is online at any one time.
The Y-cable is bi-directional and can be used in either the
Transmit (Tx) or Receive (Rx) direction, at either end of a fiber
span, depending on the function it is to provide.
Y-Cable Splitter
The Y-cable supports the following features:
Fiber leads are 1 meter each in length
SC connectors
Optical loss of 0.5 dB
CONFIGURATION OPTIONS
The Y-cable can be used in any application where it is desirable
to split an optical source. The following two configurations are
provided as examples of possible applications:
Single span redundancy
Test kit lead
Product P/N: 1184015L1
Issue Date: 0804
Document P/N: 61184015L1-22A
Single Span Redundancy
When an existing optical path is upgraded from a stand-alone configuration to a redundant configuration, using Y-cables can
eliminate the need to run new fiber spans for the Protect modules. Installing Y-cables at each end of the existing spans allows
Working and Protect modules to share the same fibers.
Test Kit Lead
Installing a Y-cable between the existing fiber and optical device enables a test kit to be attached to the second lead of the Y-cable.
In this configuration, a test kit can be attached without disrupting traffic.
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
Stand-alone Configuration
Tx
Tx
Rx
Rx
Tx
Tx
Rx
Rx
Tx
Rx Tx
Rx
Redundant Configuration
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
Far End
Near End
Working Module
Protect Module
#1
#2
#4
#3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
1184003L1
RMCRMC
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
OPTI-3
ENABLE
TESTAPS ACO
1184002L1V
CRAFT
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
STATUS
OPTICS
DS3-1
ACO
DS3-2
DS3-3
Tx
Tx
Rx
Rx
Tx
Tx
Rx
Rx
Without Test Kit
Tx
Tx
Rx
Rx
Tx
Tx
Rx
Rx
Test
Kit
With Test Kit
1184015L1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adtran opti 3 y cable splitter kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adtran opti 3 y cable splitter kit in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info