603960
31
Zoom out
Zoom in
Previous page
1/38
Next page
31
$PNMRX301, Ephemeris Data Transfer
This message format is used to transfer the ephemeris data between nodes; it uses a packed
hexadecimal format to transfer ephemeris data for each of the available SVs. Since the Ephemeris
data is large and can take time to transfer over a slow serial interface, the data is divided into
individual messages for each of the SVs. These messages are transmitted sequentially and can be
interleaved with other messages to prevent the Ephemeris data blocking higher priority messages
such as scheduled PVT information. The data for these messages is expressed as signed or unsigned
fixed point values which have been scaled from the floating point values used in the position
solution. The appropriate scaling factors are included in the table. The ephemeris data for each
satellite is divided into 3 separate messages with sequence numbers to identify them, the contents
of these frames reflects the contents of the appropriate subframes 1,2,3 transmitted from the SVs.
When transmitted these messages are generated in ascending order of SV Id and sequence number,
when being sent to the node these can be sent in any order, provided that the 3 messages for any
individual satellite are grouped together, each message is individually interpreted and after a group
of 3 valid messages for an SV the ephemeris for that SV is updated independently. The 3 message
formats are illustrated in the following tables
PNMRX301 message 1 field list
Field Format width scale Units Notes
Message ID $PNMRX301 8 PNMRX301 protocol header.
Satellite vehicle Id Int 2 Decimal satellite vehicle Id from 1 to 32.
Subframe Id Int 1 Subframe number 1.
Week number Hex 3 Weeks 10 bit week number.
Health Hex 2 6 bits.
URA Hex 1 User range accuracy.
Time Group Delay Hex 2 2
-31
Seconds 8 bits.
IODC Hex 3 10 bit integer.
Toc Hex 4 2
-4
16 bits.
Af2 Hex 2 2
-31
sec/sec
2
8 bit signed integer.
Af1 Hex 4 2
-43
sec/sec 16 bit signed integer.
Af0 Hex 6 2
-31
Seconds 22 bit signed integer.
Checksum *xx (0) 3 2 digits.
Message terminator <CR> <LF> 2 ASCII 13, ASCII 10.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adapt AD300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adapt AD300 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Adapt AD300

Adapt AD300 User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info