Manual Abilia IR-9MP Linak 808427 (page 7 of 8) (English, Swedish)

677237

Zoom out

Zoom in

1/8

Description

IR-9MP LINAK is a programmable IR receiver with 8 relay outputs. A

maximum 8 functions can be controlled on the bed, the head end, foot

end, knee and the whole bed. The receivers are designed to be

connected to the Linak control units CB-09, CB-10, CB-12 and Scanbed

750.

Connecting IR receiver

Connect the split cable to the control unit and the IR receiver and the

manual control handle to the split cable. Hang the IR receiver on the

wheel frame on the bed or on the headboard. Put the IR receiver in the

direction where you get the best receiving conditions (not towards a wall).

Inside the suspension device there is a Velcro to fasten the IR receiver in

the right place.

Make sure no cables are squeezed! Fasten

the redundant cabling with the enclosed

strap. Check that the cables are long enough

when the bed is in its highest position.

Programming channels

The default setting on the receiver is the

channels 16-23 (see function table). The

receiver is set to work with an IR

transmitter with 8 functions. If another

transmitter or other channels are to be

used the IR receiver has to be re-

programmed.

Do as follows to re-program:

Press a programming button on the circuit board on the IR receiver.

Press, at the same time, the key on the transmitter that is to activate a

function on the IR receiver. The IR receiver learns which channel is

transmitted. If the programming button is pressed for approx. 1 sec. the

function will be monostable. If the programming button is pressed for

approx 4 sec. the function will be bistable. Note! When controlling a bed,

the function must not be bistable. The indicator led on the receiver flashes

to confirm the programming. Continue to program the next output etc.

Programming buttons

1 2 3 4 5 6 7 8 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia IR-9MP Linak 808427 in the language / languages: English, Swedish as an attachment in your email.

The manual is 0,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abilia IR-9MP Linak 808427 Manual

Product: