65664

ZyXEL Prestige 2000W v.2 Manual

1
Zoom out
Zoom in
Previous page
1/6
Next page
Date: 2005-04-06
1 (1)
Prestige 2000W, ZyXEL
Configure the ZyXEL Prestige 2000W to work with the
Internet Gate
Note that the ZyXEL cradle is only used for charging batteries in the
ZyXEL handset, not for supporting wireless LAN or Internet
connection. The Internet Gate will be used as wireless access point for
the ZyXEL handset. This guide assumes that you already have your
Internet Gate up and running. If you are having problems in getting
your Internet Gate to work please refer to the user guides at
www.intertex.se/files/ix67support.htm
. Make sure to always have your
Internet Gate and the phone updated with the latest firmware. You will
find information on how to upgrade your Internet Gate firmware at
www.intertex.se/files/upgradefirmware.htm
. This guide assumes you
have ZyXEL’s firmware WJ.00.10 (from April 2005)
1
.
Contents
1 BASIC CONFIGURATIONS.........................................................................................1
1.1 TWO BASIC WAYS TO SETUP YOUR PHONE / CLIENT ....................................................2
1.2 C
ONFIGURING THE WIRELESS NETWORK ON THE INTERNET GATE ..............................2
1.3 C
ONFIGURING THE WIRELESS NETWORK ON THE ZYXEL HANDSET. ..........................3
1.4 C
ONFIGURING THE SIP SETTINGS ON THE ZYXEL HANDSET.................................... 43
54
2 ADDITIONAL INFORMATION AND CONFIGURATION.....................................4
2.1 DETERMINE THE MAC ADDRESS OF YOUR ZYXEL HANDSET ....................................4
2.2 D
ETERMINE THE IP ADDRESS OF YOUR ZYXEL HANDSET........................................
2.3 ACCESS THE ZYXEL WEB-SERVER.............................................................................5
2.4 LIMIT SIZE OF IP PACKETS..........................................................................................5
2.5 M
ORE INFORMATION ..................................................................................................5
1 Basic configurations
Note: The ZyXEL Prestige 2000W does not support IP fragmentation, that is dividing
large IP packets into smaller ones. If IP packets grow too large, the ZyXEL phone can
simply not handle them. To use the TCP protocol instead of UDP would solve this
problem. Unfortunately the ZyXEL phone only supports the UDP protocol and not TCP.
One factor that makes the IP packet grow is the SIP VIA header. For each new hop (for
instance SIP gateways, SIP proxys etc) a new SIP VIA header is added to the SIP
signalling message. In the Internet Gate there is a way to limit the sizes of IP packets by
stripping the VIA header on incoming SIP calls. By enabling this feature it is more likely
that the ZyXEL phone will accept incoming calls. This will not cause any other problems,
INTERTEX DATA AB
Rissneleden 45, SE-174 44, Sweden, Tel: +46 8 6282828, Fax: +46 8 6286414, www.intertex.se
1
· You will find a link to download the latest firmware in section 2.5
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Prestige 2000W v.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Prestige 2000W v.2 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info