735534
1
Zoom out
Zoom in
Previous page
1/3
Next page
ZG1683RU 3 IN 1 CO2 Monitor (CO2+Temp.+RH) Operating Instructions
Product Overview
Thank you for selecting ZG1683RU desktop CO2 monitor, ZG1683RU CO2 monitor is smart, compact and easy-to-use. In addition to measuring
the CO
2 concentration, ZG1683RU can also measure the ambient temperature and the relative humidity (CO2+Temp. +RH). This product is
developed to detect the presence of CO
2 in ambient air and help people to take care of Indoor Air Quality. ZG1683RU can be widely used in the
office building, school, exhibition hall, shopping mall, meeting room, fitness center, restaurant and other public places where personal comfort,
healthy is important.
Features:
V Three different LED display shows the current Indoor Air Quality
V Press MUTE button for alarm on/off.
V Built in the LCD Backlight for easy reading in the dark.
Warnings:
V Please take off the AC power adapter and store it well when this CO2 monitor left idle for long.
V This CO2 monitor is for home use, not suitable for certifying the test results.
V If use this CO2 monitor for testing, ZG1683RU does not guarantee the test results.
EMC/RFI
Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per meter, but the
performance of the instrument will not be permanently affected.
Note: Under the electromagnetic field of 3V/m, the reading will not meet the specification.
Warm-Up Time: 2 MIN.
Using the MUTE function:
Connect to PC with data log function:
1. The ZG1683RU connect with PC first.
2. http://www.zyaura.com/products/ZG1683R.asp “Connect to PC with data log function (ZG1683RU )” for the software
(ZyAura_USB_HUB_PC_software.rar) and installation processes.
1. Green LED Display (<800ppm)
2. Yellow LED Display (800-1200ppm)
3. Red LED Display (>1200ppm)
4. Mute Button
5. Power Inlet
6. Housing Stand
7.
Screw Position
1. 2 min. warm-up time when first time power.
2. The LCD shows 4 bars with 1sec blank cycle during warm-up
3. The MUTE button is disabled during warm-up
4. The device shows the CO2 reading after warm-up
Press MUTE button to select buzzer on/off.
If the “MUTE” function is off, while CO2
concentration exceed the alarm level (>1200 ppm), there will be a buzzer.
Note: The device setting with alarm is buzzer on when power on first time, user can set the alarm on/off under MUTE function.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyAura ZG1683RU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyAura ZG1683RU in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info