792489
1
Zoom out
Zoom in
Previous page
1/2
Next page
If your main television program source is a
cable or satellite box, you probably use the
cable/satellite remote control for channel
and volume commands. After following
the steps outlined in this guide, you can
continue to use your cable/satellite remote
control to adjust the volume output from the
Z-Base 555.
Sit within easy reach of the
Z-Base 555’s front control panel.
You will need to press two buttons on
the Z-Base 555 front panel to start the
learning process, then press four remote
control buttons.
Press both Z-Base VOLUME
buttons until “Lrn” appears
(about 4 seconds). Then release
both VOLUME buttons.
Get ready to press VOLUME UP
on the Remote Control.
Locate the
following
buttons on your
remote control:
1 VOLUME UP
2 VOLUME DOWN
3 MUTE
4 POWER
The learning process
involves pressing these four
buttons in sequence.
1
2
3
PREPAREPREPAREPREPARE
4
3
1
2
1 2
3 4
When UP 1 appears,
press and hold VOLUME UP.
When dn 2 appears,
press and hold VOLUME DOWN.
When - - 3 appears, press and hold MUTE. When pr 4 appears, press and hold POWER.
When - - - - appears, release VOLUME UP.
When - - - - appears,
release VOLUME DOWN.
When - - - - appears, release MUTE. When - - - - appears, release POWER.
When rEP appears,
press and hold VOLUME UP, again.
When rEP appears,
press and hold VOLUME DOWN, again.
When rEP appears,
press and hold MUTE, again.
When rEP appears,
press and hold POWER, again.
When good appears, release VOLUME UP. When good appears, release VOLUME DOWN.
When good appears, release MUTE. When good appears, release POWER.
volume up volume down
mute power
Learn
Button Learn
Button
Learn
Button Learn
Button
●●●●●●●●●●●●●●YOU ARE DONE! ●●●●●●●●●●●●●●
Your
Current TV Remote
Can Control Your
ZVOX System.
The steps involve pressing the Volume, Mute, and Power
buttons of your favored remote control with it positioned
close to the control panel of the Z-Base 555. The
Z-Base 555 allows these new commands to adjust
Volume, Mute and Power. To insure accuracy, the
ZVOX Learning routine records each button’s infrared
signal twice, then confirms a successful recording.
This remote is only
an example. Your
remote is probably
different. Please
locate these
buttons on your
remote.
If you see the “no change” message (nocH)
during the learning routine, the Z-Base 555
did not accept the infrared code. The current
step in the learning routine will repeat.
Error Message Of the
ZVOX Learning Routine
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zvox Z-Base 555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zvox Z-Base 555 in the language / languages: English as an attachment in your email.

The manual is 1.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zvox Z-Base 555

Zvox Z-Base 555 Quick start guide - English - 1 pages

Zvox Z-Base 555 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info