After following the steps outlined in this guide, your cable remote will
adjust the volume output from your SoundBase system. Please Note:
If you have a DirecTV remote control, use the DirecTV remote guide
included along with this instruction sheet.
The steps involve pressing the Volume, Mute, and Power buttons of your
preferred remote control with it positioned close to the numeric display
of the SoundBase. Once complete, the SoundBase will respond to
these buttons from your preferred remote, in addition to the SoundBase
remote control. To insure accuracy, the learning routine records each
button’s commands twice, then confirms a successful recording.
ZVOX® Audio has specific instruction sets available for a variety of
popular remote controls. These instructions provide an alternate method
for configuring your SoundBase to respond to your preferred remote
control. If you can not easily teach the SoundBase to respond to your
preferred remote control, please contact ZVOX Audio about additional
instructions for your preferred remote control.
123
Sit within easy reach of the
SoundBase system’s front
control panel.
You will need to press two buttons on
the SoundBase system front panel to
start the learning process, then press four
remote control buttons.
Locate the following
buttons on your
remote control:
1VOLUME UP
2VOLUME DOWN
3MUTE
4POWER
The learning process
involves pressing these
four buttons in sequence.
This remote is only an example. Your
remote is probably different. Please
locate these buttons on your remote.
Press both SoundBase system
VOLUME buttons until “Lrn”
appears (about 4 seconds). Then
release both VOLUME buttons.
• Get ready to press VOLUME UP on the
Remote Control.
When appears, press
VOLUME UP for 1 second.
You should see .
When appears, press
VOLUME UP for 1 second, again.
You should see ,
followed by .
When appears, press
VOLUME DOWN for 1 second.
When appears, press
VOLUME DOWN for 1 second, again.
You should see ,
followed by .
When appears, press
MUTE for 1 second.
You should see .
When appears, press
MUTE for 1 second, again.
You should see ,
followed by .
When appears,press
POWER for 1 second.
You should see .
When appears, press
POWER for 1 second, again.
You should see ,
followed by .
PREPARE
LEARN BUTTONS
YOU ARE DONE!
If you see the “no change” message (nocH) during the learning routine, the
SoundBase system system did not accept the infrared code. The current step
in the learning routine will repeat.
1234
Error Message of the
SoundBase Learning Routine
You should see .
4
3
1
2
volume upvolume downmutepower
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Zvox SoundBase 670 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Zvox SoundBase 670 in the language / languages: English as an attachment in your email.
The manual is 0.83 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
