666171

Zoom TAC-8 Thunderbolt Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
05
Names of Parts
Rear Panel
POWER switch
Turns the
ON/OFF.
DC 12V AC adapter
connector
Connect the included
AC adapter here.
Thunderbolt port
Connect this to a
computer.
STAND ALONE
switch
Use to turn
standalone mode
on/off. (
ĺ
P.4)
LINE OUTPUT jacks
Connect monitors for
multichannel monitoring or
external effects.
These support balanced
output with 1/4-inch phone
plugs.
MAIN OUTPUT jacks
Connect speakers with built-
in amplifiers or an amplifier
and speaker system.
These support balanced
output with 1/4-inch phone
plugs.
S/PDIF IN/OUT jacks
Connect coaxial cables
that comply with the S/
PDIF standard.
Two channels of digital
audio signals in S/PDIF
format can be sent and
received at resolutions up
to 24-bit/192kHz .
WORD CLOCK
IN/OUT connectors
Use these to send
and receive word
clock signals between
the [TAC-8] and other
devices.
MIDI IN/OUT jacks
Connect a MIDI keyboard or
MIDI controller to the MIDI IN
jack.
Connected MIDI sound module
or other device to the MIDI
OUT jack.
ADAT OPTICAL IN/OUT jacks
Connect optical cables that comply with
the ADAT Optical standard.
These can send and receive digital audio
signals in ADAT, SMUX and SMUX4
formats.
Sampling rates and inputs/outputs
Sampling rate
Analog inputs/
outputs
S/PDIF inputs/
outputs
ADAT inputs/
outputs
Total inputs/
outputs
44.1 or 48kHz 8/10 2/2 8/8 18/20
88,2 or 96kHz 8/10 2/2 4/4 14/16
176.4 or 192kHz 8/10 2/2 2/2 12/14
NOTE
When shipped new from the factory, the AD/DA converter upsampling
function is enabled. This will cause operation with a 4x sampling
rate when the sampling rate is 44.1/48 kHz. See the
Reference Guide to disable it.
Upsampling
When the original sampling rate is 44.1 kHz or 48 kHz, internal
processing can allow operation at 176.4 kHz or 192 kHz (enabled
when shipped new from the factory). This eliminates aliasing noise
from the sound during A/D conversion and makes the sound with D/
A conversion even clearer than before.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom TAC-8 Thunderbolt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom TAC-8 Thunderbolt in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info