533793
97
Zoom out
Zoom in
Previous page
1/100
Next page
Troubleshooting
96
Troubleshooting
If you have any problems during operation of the R16, check the following points first.
Problems during playback •••••••••••••••••
No sound, or sound is very weak.
Check the connections to your monitoring system
and the volume settings of the system.
Make sure that status keys in the mixer section are
lit green (except the [MASTER] status key) and
that faders are raised. If a key is not green, press it
repeatedly until it lights green.
Make sure that the [MASTER] status key is not lit and
that the [MASTER] fader is raised.
Moving the fader does not affect the volume.
On channels for which stereo link is turned on,
the fader of the even-numbered channel will have
no effect. Either turn stereo link off (P.20), or
use the fader of the odd-numbered channel in
the pair.
No sound from input signal, or sound is very weak.
Make sure that the [GAIN] control for the
respective input is increased.
Check that the status light is green (playback
enabled) and that the fader of the track is raised.
An operation does not work and the message “Stop
Recorder” is shown on the display.
Some operations are not possible while the
recorder is operating. Press the [STOP] key
to stop the recorder and then conduct the
operation.
Problems during recording ••••••••••••••••
Cannot record on a track.
Make sure that you have selected and enabled a
recordable track.
Check whether you have run out of free space on
the SD card (P.70).
Recording is not possible if the project is
protected. Either set “PROTECT” to “OFF”
(P.54), or use a different project.
The recorded sound is distorted.
Make sure that the [GAIN] (input sensitivity) and
recording level are not set too high.
Lower the fader so that the 0 (dB) indicator of the
level meter does not light.
If the EQ gain of the track mixer is set extremely
high, the sound may be audibly distorted even if
the fader is lowered. Set the EQ gain to a lower
value.
When an insert effect is applied to an input,
check whether the effect output level (patch
level) setting is appropriate.
Problems with effects ••••••••••••••••••••
Insert effect cannot be inserted.
When using the 8x COMP EQ algorithm, the
selection of insert points is limited (P.49).
Insert effect does not work.
Check that the “INSERT EFFECT” icon is shown
on the display. If it is not shown, press the [INSERT
EFFECT] key and then press [ENTER] to enable
it.
Make sure that the insert effect is inserted in the
desired location (P.49).
Send/return effect does not work.
Check that the “CHORUS/DELAY” icon is shown
on the display. If it is not shown, press the SEND
RETURN EFFECT key and then press [ENTER] to
enable it.
Make sure that the send level for the track is
raised (P.37, 48).
Other problems •••••••••••••••••••••••••
Cannot save a project.
The project cannot be saved if the project is
protected. Set “PROTECT” to “OFF” (P.56).
Cannot create a new project or copy a project.
If “Project Full” appears on the display, all the
memory available on the card has been used.
Delete unneeded projects to free up memory.
An error message is shown when attempting to
execute a command.
Please check the error message list (P.44).
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom R16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom R16 in the language / languages: English as an attachment in your email.

The manual is 33,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom R16

Zoom R16 User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info