Manual Zoom 2100 (page 22 of 24) (English)

666309

Zoom out

Zoom in

1/24

Resetting the 2100 to the factory default condition

No sound, or the

volume is very low

• Is the AC adapter connected correctly? Is

the power turned on?

Follow the instructions in the “Connections”

section and turn on the power to the 2100.

• Is the guitar connected to the INPUT jack

correctly? Is the amplifier connected to the

OUTPUT jack correctly?

Follow the instructions in the “Connections”

section and make the connections correctly.

• Are you using an appropriate shielded

cable?

Change the shielded cable and try again.

• Is the power turned on to the connected

amplifier?

Turn on the power to the connected amplifier.

• Is the volume of the guitar or the amplifier

raised to an appropriate level?

Raise the volume to the optimum level.

Adjust the master level. (See page 5.)

• Is the Mute function turned on?

• Is the master level lowered?

Operate the FP01 or FP02.

• Is the volume level controlled via the

FP01or FP02 (option) foot pedal lowered?

Cancel the Mute function.

Patches cannot be

changed.

• Is the 2100 in Manual mode?

Press the [FUNCTION] switch to set the 2100 to

Play mode.

• Is the 2100 in store standby mode or All

Initialize standby mode?

Press the [STORE] key to execute the function, or

press the [GROUP/EXIT] key to quit standby

mode and return to Play mode.

No sound from the CD

player connected to the

AUX IN jack.

• Is the volume level of the CD player set

correctly?

Set the volume level of the CD player to the

optimum level.

Symptom Check Action

Type(RTM)

Sens

Rate

POSITION

1.COMP/WAH•DIST

2.DIST•COMP/WAH

COMP

WAH

Type

Gain

Top

Tone

Body

LevelPatch Level

DIST

Treble

Middle

Bass

ZNR

Type

Depth

/Time

Rate

/Pit/FB

Mix

/Mode

MOD

Type

Time

Tone

/FB

Mix

REV

DLY

1.AUX Mix

3.AUX Rch

2.AUX Lch

1.COMP

2.PEDAL-WAH

3.AUTO-WAH

4.TREMOLO

5.RING MOD

6.SLOW ATTACK

4.PLAYNOTE

Max Rec Time

Constant Pitch

Tone

Gain TrimMaster Level

JAM 1 JAM 2 JAM 3 JAM REC

Presence Amp Sim Rev Trim FUNCTION

SAMPLER

COMP

WAH

UTILITY

PARM

1.CLEAN

2.OVER DRIVE

DISTORTION

4.FUZZ

GRUNGE

5.LEAD

6.METAL

7.ACOUSTIC

DIST

1.CHORUS

2.STEREO CHO

FLANGER

4.PHASE

5.PITCH

6.PEDAL-PITCH

7.DELAY

MOD

1.HALL

2.ROOM

3.PP-DELAY 1

4.PP-DELAY 2

REV/

DLY

JAM PLAY

MONITOR

OFF

VALUE

–

321

GROUP(EXIT)

PATCHBANK

STORE

PRESETBOTH

BANK

SAMPLER

FUNCTION

SPEED

REC

The All Initialize and Factory Recall modes are special modes used to reset the 2100 to the factory

defaults. All Initialize mode reverts all global parameters and patches in the USER group to the

factory default settings. Factory Recall mode reverts only particular patches in the USER group to

the factory default settings.

Press and hold down the [STORE] key, and

turn on the power to the 2100.

“ ” appears on the display.

* Using All Initialize mode ➝ Proceed to the

next step.

* Using Factory Recall mode ➝ Use the

[BANK▲] switch and foot switches 1–3 to

select patch(es) in the USER group you wish

to reset to the factory settings.

Press the [STORE] key again.

All Initialize or Factory Recall is executed. When

All Initialize is complete, the 2100 automatically

returns to Play mode.

All patches stored by the user will be erased when you

execute All Initialize. To cancel All Initialize/Factory

Recall, press the [GROUP/EXIT] key before step .

NOTE

Troubleshooting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 2100 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zoom 2100 Manual

Product: