666307

Zoom 1010 Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
PARAMETER 1 ( EFFECT TYPE ) 1–3
PARAMETER 2 DEPTH 0–10
PARAMETER 3 RATE 1–20
PARAMETER 4 FEEDBACK 0–10
Description
(1)EFFECT TYPE
Selects the effect type. To use the doubling effect, set
the parameter to "3".
(2)DEPTH
Determines the short delay duration. The value shown
on the display multiplied by 10 is the delay in
milliseconds. The range is 0 to 100 ms.
(3)RATE
Determines the ratio of direct sound and delayed sound.
Higher values produce more delay.
(4)FEEDBACK
Determines the amount of feedback, i.e. the proportion
of the signal routed back to the input of the effect
circuit.
This effect module comprises three types of reverb effects.
This effect simulates a natural hall, expansive sound.
PARAMETER 1 ( EFFECT TYPE ) 1–3
PARAMETER 2 TIME 1–10
PARAMETER 3 TONE 0–10
PARAMETER 4 MIX 0–10
Description
(1)EFFECT TYPE
Selects the effect type. To use the hall effect, set the
parameter to "1".
(2)TIME
Determines the reverb time. Higher values produce
longer reverb times.
(3)TONE
Determines the reverb tone. Higher values produce
brighter sound.
(4)MIX
Determines the balance between direct sound and effect
sound. "0" means direct sound only, and "10" means
maximum reverb.
This effect simulates a room with short reverberation.
PARAMETER 1 ( EFFECT TYPE ) 1–3
PARAMETER 2 TIME 1–10
PARAMETER 3 TONE 0–10
PARAMETER 4 MIX 0–10
Description
(1)EFFECT TYPE
To use the room effect, set the parameter to "2".
This is a conventional digital delay effect with a delay
time of up to 420 milliseconds.
PARAMETER 1 ( EFFECT TYPE ) 1–3
PARAMETER 2 TIME(X10mS) 0–42
PARAMETER 3 FEEDBACK 0 –10
PARAMETER 4 MIX 0–10
Description
(1)EFFECT TYPE
Selects the effect type. To use the delay effect, set the
parameter to "3".
(2)TIME
Determines the delay intervals in 10-ms steps.
(3)FEEDBACK
Determines the amount of feedback, i.e. the proportion
of the signal routed back to the input of the effect
circuit.
(4)MIX
Determines the mixing ratio between direct sound and
delay sound. Higher values produce more delay.
PARAM4 of the effect module COMP&WAH controls the
level setting for each patch. Although it is not an effect, it
is also stored as a parameter along with the other
parameters of the patch.
PARAMETER 4 PATCH LEVEL 0–30
Description
(4) PATCH LEVEL
Determines the output level of the patch.
When the EQ effect module is set to flat response and all
other effect modules are set to OFF, setting this
parameter to "25" results in the same sound as when the
unit is bypassed.
This parameter can be set regardless of the ON/OFF
setting of the COMP&WAH module. This parameter is
also the only one which can be changed in the Play
mode, by using the VALUE keys.
HINTHINT
NOTE
Patch Level
Patch Level
3
DELAY
3
DELAY
2
ROOM
2
ROOM
1
HALL
1
HALL
Effect Module 5
REV/DLY (Reverb/Delay)
3
DOUBLING
12
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 1010 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info