Manual Zoef Robot Pieter - ZB19Z (page 50 of 51) (English, German, Dutch)

743015

Zoom out

Zoom in

1/51

5 Maintenance

5.1 Impeller

※ Replace the Impeller if the old one gets worn or damage.

Step 2

Use a Phillips Head Screw

Driver to remove the bolt in the

I m p e l l e r a c c o r d i n g t h e

diagram.(Pic.5.1.2)

※

Step 3

Replace the new Impeller

and assemble Impeller and

Guide Vane

※

- 11 -

Guide Vane

Step 1

※ Rotate Guide Vane clockwise

to remove from the iCleaner Rover.

(Pic.5.1.1)

4.3 Proper Shut Down and Care4.3 Proper Shut Down and Care

(1) To Shut Down the iCleaner Rover:

turn the “ ” on the Power Box to the

off position, once the iCleaner Rover

finishes working, pull the Floating

Cable slowly until the Handle emerges

from the water (Pic.4.3.1), and then pull

the iCleaner Rover out of the pool by its

Handle.

(2) Clean iCleaner Rover: invert the iCleaner Rover gently onto the floor,

unlock the Latch on the Base Plate (Pic4.3.2) and remove the Filter Bag from

Base Plate, clean the Filter Bag (Pic.4.3.3). Once clean the Filter Bag on its

frame, reassemble the Base Plate and put it back into the iCleaner Rover once

the Filter Bag is dry.

(Note: when re-fitting the Filter Bag to the Base Plate, please ensure the long

sides of the Filter Bag are smooth to ensure an easy fit into the base of the

iCleaner Rover.)

OPEN

Pull

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zoef Robot Pieter - ZB19Z in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 20,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zoef Robot Pieter - ZB19Z Manual

Product: