Manual Zippie Youngster 3 (page 21 of 112) (English, German, Dutch, French, Italian)

713909

Zoom out

Zoom in

1/112

ENGLISH

YOUNGSTER 3

Tyres and Mounting

Always make sure you that you maintain the correct tire

pressure, as this can have an effect on wheelchair performance.

If the tire pressure is too low, rolling resistance will increase,

requiring more effort to move the chair forward; Low tire

pressure also has a negative impact on maneuverability. If the

tyre pressure is too high, the tyre could burst. The correct

pressure for a given tyre is printed on the surface of the tyre

itself. Tyres can be mounted the same way as an ordinary

bicycle tyre. Before installing a new inner tube, you should

always make sure that the base of the rim and the interior of the

tyre are free of foreign objects. Check the pressure after

mounting or repairing a tyre. It is critical to your safety and to

the wheelchair’s performance that regulation air pressure be

maintained and that tyres are in good condition.

5.0 Tyres and Mounting

Please open on each side of the frame the screws (1) and

separate the frame from the cross brace. Then take the

composite sleeves (2) out of their position in the cross brace

ends, turn them 180° and put them back into the cross brace

ends in the reversed position. Afterwards open the central cross

brace bolt (3) and remove the bolt. Then remove and reverse

the composite sleeves (4) also 180° and reposition them at the

cross brace. Now install the central bolt into the cross brace

again and close the screw with 7 NM. Finally bring the frames

and the cross brace together and close the screws (1) with 7

Nm again.

In order to adjust the seat upholstery open the screws (1),

remove the seat rail end plugs and pull the upholstery off the

seat rails. Then adjust the width of the upholstery with the

Velcro below the seat. Finally install the upholstery and the end

plugs in the seat rails and tighten the screws (See Fig. 4.27)

The back upholstery is width adjustable with Velcro straps –

both the straps as well as the cover therefore have Velcro parts

attached.

Finally the footrest offer a width adjustment over clamps (see

chapter footrests page.12)

Seat width growth (Fig. 4.32 / 4.33)

In order to adjust the seat depth, please open both screws (1)

on each side of the cross brace / seat rails. Then move the seat

rail and seat upholstery to the dedicated position, ensure that

both sides are aligned and then tighten the screws (1) with 5

Nm. again. Finally it might be needed to re-position the saddles

(2) in one position.

Seat depth growth (Fig. 4.34)

Fig. 4.32

Fig. 4.33

Fig. 4.34

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zippie Youngster 3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zippie Youngster 3 Manual

Product: