Manual Zippie Youngster 3 (page 18 of 112) (English, German, Dutch, French, Italian)

713909

Zoom out

Zoom in

1/112

ENGLISH

YOUNGSTER 3

Pelvic Restraint Belt

CAUTION:

Before using your wheelchair ensure the lap belt is worn.

The lap belt must be checked on a daily basis to ensure it is

free from any obstruction or adverse wear.

Always make sure that the lap strap is correctly secured and

adjusted prior to use. If the strap is too loose it could cause the

user to slip down and risk suffocation or cause serious injury.

The lap belt is fitted to the wheelchair as shown in the

illustrations. The seat belt comprises 2 halves. They are fitted

using the existing seat stay retaining bolt fitted through the

eyelet on the belt. The belt is routed under the rear of the side

panel. (Fig. 4.21)

Adjust the belt position so buckles are in the centre of the seat.

(Fig. 4.22)

Adjust lap belt to suit the user’s needs as follows:

To reduce the belt

length

Feed free belt back

through male buckle

and slide adjusters.

Ensure belt is not

looped at male buckle.

Feed free belt through slide adjusters and

male buckle to provide more belt length.

To increase the belt length

When fastened check space between the pelvic restraint belt

and user.

When correctly adjusted it should not be possible to insert more

than the flat of the hand between the lap belt and the user. (Fig

4.23)

The lap belt should be fixed so that the belt sits at an angle of

45 degrees across the user’s pelvis. The user should be upright

and be as far back as possible in the seat when correctly

adjusted. The lap belt should not allow the user to slip down in

the seat. (Fig. 4.24)

Fig. 4.22

Fig. 4.21

Fig. 4.24

Fig. 4.23

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zippie Youngster 3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zippie Youngster 3 Manual

Product: