Manual Zibro RS 30 (page 14 of 16) (English, German, Dutch, Danish, French, Italian, Spanish)

728810

Zoom out

Zoom in

1/16

12 Install the wick to the wick sleeve according to the allo-

wed direction engraved on the wick sleeve.

13 Install the wick sleeve (with wick) to the primary air

tube. And then turn the wick sleeve clockwise to set in

the handle arm.

Install the bracket. Then tighten the screw which is hol-

ding the stem.

15 Put the wick holder chassis back into position.

16 Screw the four wing nuts hand tight.

17 Place the knurled wick adjustment knob on the wick

mechanism. Turn the knob as far to the right as possi-

ble. Press the tip-over switch. Check that the wick can

be lowered completely. Repeat this check a number of

times. If the wick cannot be lowered completely it has

not been placed correctly. If this is the case, repeat the

procedure from No. 12. Pull the knurled wick adjust-

ment knob off the heater.

18 Put the cabinet back into position and tighten the three

screws. Put the knurled wick adjustment knob back into

position. Now put the combustion chamber back into

position. Check that it is level by sliding it slightly to the

left and the right by its handle. Close the grill.

19 Put the filled removable tank into position. Put the bat-

teries into the battery holder (ensure that the positive

and negative poles match the + and – marks indicated

on the battery housing). Wait 30 minutes after replac-

ing the tank and batteries before using the heater.

13a

17b

13b

14b

18c

19a

17a

14a

15 16

18b

18d

12b

12a

18a

19b

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro RS 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro RS 30 Manual

Product: