623343
84
Zoom out
Zoom in
Previous page
1/86
Next page
Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
84
0xF (Inc. by 1%)
4 Bit
C T - - - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
0x7 (Dec. by 1%)
0x8 (Stop)
0x9 (Inc. by 100%)
0xF (Inc. by 1%)
[Ix] [Long
Press]
Brighter/Darker
Long Pr.
-> Brighter/Darker; Release -> Stop
1 Bit
C T - - -
DPT_Switch
0/1
[Ix] [Long Press] Dimmer ON
Sending of 1 (ON)
1 Bit
C T - - -
DPT_Switch
0/1
[Ix] [Long Press] Dimmer OFF
Sending of 0 (OFF)
1 Bit I C T - W - DPT_Switch 0/1
[Ix] [Long Press] Dimmer
ON/OFF
Switching 0/1
1 Byte
C T - - -
DPT_SceneControl
0-63; 128-191
[Ix] [Long Press] Run Scene
Sending of 0 - 63
1 Byte
C T - - -
DPT_SceneControl
0-63; 128-191
[Ix] [Long Press] Save Scene
Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm:
Breakdown or sabotage
1 = Alarm; 0 = No Alarm
2 Bytes
C T - - - 9.xxx
-671088.64 -
670760.96
[Ix] [Long Press] Constant
Value (float)
Float value
2 Bytes
C T - - - DPT_Value_2_Ucount 0 - 65535
[Ix] [Long Press] Constant
Value (Integer)
0
- 65535
1 Byte
C T - - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant
Value (Percentage)
0%
- 100%
1 Byte
C T - - - DPT_Value_1_Ucount 0 - 255
[Ix] [Long Press] Constant
Value (Integer)
0
- 255
239, 245 1 Bit
C T - - - DPT_Trigger 0/1
[Ix] [Long Press/Release] Stop
Shutter
Release
-> Stop Shutter
240, 246
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Long Press] Dimming
Status (input)
0%
- 100%
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Long Press] Shutter
Status (input)
0% = Top; 100% = Bottom
247
1 Byte
I
C - - W -
DPT_SceneControl
0-63; 128-191
[Motion Sensor] Scene Input
Scene Value
248
1 Byte
C T - - -
DPT_SceneControl
0-63; 128-191
[Motion Sensor] Scene Output
Scene Value
249, 273
1 Byte
O
C T R - -
DPT_Scaling
0% - 100%
[Ix] Luminosity
0-100%
250, 274
1 Bit
O
C T R - -
DPT_Alarm
0/1
[Ix] Open Circuit Error
0 = No Error; 1 = Open Circuit Error
251, 275
1 Bit
O
C T R - -
DPT_Alarm
0/1
[Ix] Short Circuit Error
0 = No Error; 1 = Short Circuit Error
252, 276
1 Byte
O
C T R - -
DPT_Scaling
0% - 100%
[Ix] Presence State (Scaling)
0-100%
253, 277 1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Ix] Presence State
(HVAC)
Auto, Comfort, Standby, Economy, Building Protection
254, 278
1 Bit
O
C T R - -
DPT_Occupancy
0/1
[Ix] Presence State (Binary)
Binary Value
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Lite Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Lite Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info