729850
1
Zoom out
Zoom in
Previous page
1/2
Next page
Mobile Home Rear View Camera and Camera Switch Box
ZE-RVSC62
MOUNTING
INSTRUCTIONS
REAR VIEW CAMERA
KEY FEATURES
Compact high resolution rear view camera
Automatic day and night mode with four night vision IR LED’s
Built-in microphone
Aluminum die cast housing
3 m length of main wire harness with 15 m extension wire included
DESCRIPTION:
This ZENEC rear view camera model has been developed for use with mobile homes and caravans. The use of high quality parts
and materials for best weather resistance and longevity, as well as the clever construction according to IP68 protection class
allow for a perfect operation in the afore mentioned target vehicles.
CAUTION:
Most vehicles of newer production date use a pulse width modulated power feed for outer hull lights, which is
unsuitable for imaging/video electronics, as it causes considerable picture distortion.
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
The camera is water- and dustproof and has been tested according to international standard IP68. However, cleaning
your vehicle with a high pressure washer, may damage the rubber seals of the housing. For that reason you are asked
to steadily keep a distance of at least one meter between water nozzle and camera housing.
Technical Specifications:
Image device: 0.25"/6.4 mm Micron Aptina CCD sensor
Lens focal length: F 1.9
TV system: NTSC / 60 fps
View angles: 115° horizontal / 80° vertical
Native sensor resolution: 680 x 512 pixels
Resolution of video-out: > 420 TV lines
Signal to noise ratio: > 48 dB
Light sensitivity: 0.5 Lux
Video output: 1.0 Vp-p, 75 ohms
White balance: Auto
Gain control: Auto
Sync system: Auto
Power supply: DC 6~30V
Current consumption: 60mA (DC12V) / ≤ 2.5 W
IP protection rating: IP68
Operating temperature: -30°C~+75°C, RH 95% max.
Dimensions (WxHxD): 36 x 31 x 40 mm
Weight: 60 g
Technische Spezifikationen:
Kamerasystem: 0.25"/6.4 mm Micron Aptina CCD Sensor
Brennweite Linse: F 1.9
TV System: NTSC / 60 fps
Betrachtungswinkel: Horizontal 115° / Vertikal 80°
Native Sensor Au ösung: 680 x 512 Pixel
Au ösung Ausgangssignal: > 420 TV Linien
Signal/Rauschabstand: > 48 dB
Lichtempfi ndlichkeit: 0.5 Lux
Video Ausgang: 1.0 Vp-p, 75 Ohm
Weissabgleich: Automatisch
Helligkeitsabgleich: Automatisch
Synchronisation: Automatisch
Spannungsversorgung: DC 6~30V
Stromverbrauch: 60mA (DC12V) / ≤ 2.5 W
Schutzklasse: IP68
Betriebstemperatur: -30°C~+75°C, RH 95% MAX.
Dimensionen (BxHxT): 36 x 31 x 40 mm
Gewicht: 60 g
RCA yellow: Connect to RVC video-in
RCA White: Connect to Mic-in, where applicable
Red: DC 6 ~ 24 V
Black: GND
3.0 m
3.5 mm
jack
Fuse 0.5 A
15.0 m
Green wire:
Cut wire (ex-works) –
inverted picture
Both wire ends twisted
connected – normal
picture
ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
Rev. B
EU Legal Representative:
ACR S & V GmbH ∙ Industriestr. 35 D-79787 Lauchringen Germany
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ZE-RVSC62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-RVSC62 in the language / languages: English, German as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info