729884
2
Zoom out
Zoom in
Previous page
1/2
Next page
MOUNTING
INSTRUCTIONS
ZE-RVSC200
TWIN-SENSOR REAR VIEW CAMERA
KEY FEATURES
Compact twin-sensor rear view camera
Fast-mount click-on system for camera main assembly on mounting plate
Cam1 sensor with 45° and Cam2 sensor with 100° horizontal view angle
Manual adjustment of vertical / horizontal image section for Cam1 / Cam2
IR-LED night-illumination system for Cam2 with dynamic LDR brightness control
Integrated microphone (Cam2)
Separable 3-part system cable with 17.0 m main cable length
Adaptor for factory-installed Waeco main cable supplied with the set
DESCRIPTION:
The ZENEC ZE-RVSC200 twin-lens rear view camera was specially developed for semi- and fully-integrated motorhomes. In the
upper part of the camera body is the so-called Cam1. The main task of this camera is to replace the not available interior mirror.
The camera lens, which is located in the lower part, is called Cam2 and is mainly intended for maneuvering and reversing. Cam2
will record the individually adjustable area of up to 5 meters behind the motorhome. An integrated microphone as well as the IR-
LED night illumination system will support the lower camera (Cam2).
This product is compatible with a variety of 2-DIN A/V aftermarket receivers and models of the ZENEC E>GO line up, featuring
two inputs for reversing cameras and one for microphone.
ZENEC ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
CAUTION:
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
The camera is water- and dustproof and has been licensed according to the international standard IP69K. However,
vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP69K rated camera
models by water intrusion. Keep a distance of at least one meter between the water nozzle and the camera housing.
Rev. A
EU Legal Representative:
ACR S & V GmbHIndustriestraße 35D-79787 LauchringenGermany
EN
Technical Specifications:
Image device
Cam1 + Cam2:
¼” / 6.4 mm Aptina ASX340 AT
CMOS sensor
View angle (horizontal)
Cam1/Cam2:
45° / 100°
Lens focal length Cam1/Cam2: f4.2 / f2.0
Picture resolution of sensor: 680 (H) x 512 (V) pixels
Resolution of video-out signal: > 420 TV lines
Frame rate: 60 fi elds/sec.
TV system: NTSC / 60 fps
Signal to noise ratio: > 48 dB
Light sensitivity: 0.5 Lux/F1.2/50IRE ; Cam 2: 0 Lux IR ON
Video output: 1.0 Vp-p, 75 ohms CVBS
White balance: Auto
Backlight compensation: Auto
Gamma correction: 0.45
Gain control: Auto
Sync system: Auto
Power supply: DC 12V
Current consumption (@12VDC): 50mA Cam1 + 80 mA Cam2
IP protection rating: IP69K
Operating temperature: -30°C~+75°C
Audio Out (Cam 2)
Video Out (Cam 2)
Video Out (Cam 1)
Camera 1 Power (+12V)
Ground (GND)
Camera 2 Power (+12V)
17 m
0.4 m
0.4 m
DE
Technische Spezifikationen
Bildsensor
Cam1 + Cam2:
¼” / 6.4 mm Aptina ASX340 AT
CMOS Sensor
Betrachtungswinkel (horizontal)
Cam1/Cam2:
45° / 100°
Brennweite Linse von Cam1/Cam2: f4.2 / f2.0
Sensor Bildaufl ösung: 680 (H) x 512 (V) Pixel
Aufl ösung Video-Ausgangssignal: > 420 TV Linien
Bildwiederholrate: 60 Felder/Sek.
TV System: NTSC / 60 fps
Signal/Rauschabstand: > 48 dB
Lichtempfi ndlichkeit: 0.5 Lux/F1.2/50IRE; Cam 2: 0 Lux IR ON
Video Ausgang: 1,0 Vp-p, 75 Ohm CVBS
Weißabgleich: Automatisch
Belichtungskompensation: Automatisch
Gamma Korrektur: 0.45
Helligkeitsabgleich: Automatisch
Synchronisation: Automatisch
Spannungsversorgung: DC 12V
Stromverbrauch (@12VDC): 50mA Cam1 + 80 mA Cam2
Schutzklasse: IP69K
Betriebstemperatur: -30°C~+75°C
White
Black
Red
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ZE-RVSC200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-RVSC200 in the language / languages: English, German as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info