729849
2
Zoom out
Zoom in
Previous page
1/2
Next page
ZE-RVC90MT
MONTAGEANLEITUNG
RÜCKFAHRKAMERA
HAUPTMERKMALE
Kompakte hochauflösende Rückfahrkamera mit vier Montageadaptern
Gehäuse aus Aluminium Druckguss
3.5 mm Klinkenstecker mit 8 m Verbindungskabel
BITTE BEACHTEN:
Fahrzeuge neueren Datums verwenden zur Stromversorgung der Fahrzeugaussenbeleuchtung eine über PWM Taktung
generierte (pulsierende) Spannung, welche für Bildsensor/Videoelektronik ungeeignet ist, bzw. Funktions- oder Bild-
störungen zur Folge hat.
Verwenden Sie ausschließlich das mitgelieferte Anschlusskabel. Bei Nichtbeachtung erlischt Ihr Garantieanspruch.
Die Kamera ist nach der DIN EN Schutzklasse IP68 vor dem Eindringen von Schmutz- und Salzwasser geschützt.
Sollte die Kamera jedoch Hochdruckwasser-Reinigungsgeräten (Dampfstrahl) ausgesetzt werden, könnten die Dichtungen
beschädigt werden und Wasser eindringen. Es ist daher ein Abstand von mind. 100 cm von der Strahldüse einzuhalten.
Cinch Gelb: Anschluss an RVC Video-In
Rot: DC 5 ~ 24 V
Schwarz: GND
3.5 mm Klinke
Sicherung 0.5 A
3.0 m
8.0 m
BESCHREIBUNG:
Diese ZENEC Rückfahrkamera wurde für den Einsatz in einer breiten Palette an Fahrzeugen entwickelt, insbesondere die vier
speziellen Montageadapter ermöglichen eine praktisch universelle Verbaubarkeit. Die Verwendung von hochwertigen Materialien
für hohe Wetterbeständigkeit und lange Lebensdauer, als auch die clevere Konstruktion nach Schutzklasse IP68 ermöglichen
einen optimalen Betrieb in allen Zielfahrzeugen.
Die ZE-RVC90MT bietet ein grosses horizontales Sichtfeld von 115° und kann durch Bildinversion bzw. Normalbetrieb mit einer
grossen Auswahl von Steuergeräten kombiniert werden.
Diese Rückfahrkamera ist kompatibel mit allen ZENEC Moni- und Naviceivern, wie auch mit allen Modellen der ZENEC E>GO
Produktlinie.
EN
Technical Specifications:
Image device: 0.25"/6.4 mm Micron Aptina CCD sensor
Lens focal length: F 1.9
TV system: NTSC / 60 fps
View angles: 115° horizontal / 80° vertical
Native sensor resolution: 680 x 512 pixels
Resolution of video-out: > 420 TV lines
Signal to noise ratio: > 48 dB
Light sensitivity: 0.5 Lux
Video output: 1.0 Vp-p, 75 ohms
White balance: Auto
Gain control: Auto
Sync system: Auto
Power supply: DC 5~24V
Current consumption: 60mA (DC12V) / ≤ 2.5 W
IP protection rating: IP68
Operating temperature: -30°C~+75°C, RH 95% max.
Dimensions: 18 mm Ø
Weight: 20 g
DE
Technische Spezifikationen:
Kamerasystem: 0.25"/6.4 mm Micron Aptina CCD Sensor
Brennweite Linse: F 1.9
TV System: NTSC / 60 fps
Betrachtungswinkel: Horizontal 115° / Vertikal 80°
Native Sensor Aufl ösung: 680 x 512 Pixel
Au ösung Ausgangssignal: > 420 TV Linien
Signal/Rauschabstand: > 48 dB
Lichtempfi ndlichkeit: 0.5 Lux
Video Ausgang: 1.0 Vp-p, 75 Ohm
Weissabgleich: Automatisch
Helligkeitsabgleich: Automatisch
Synchronisation: Automatisch
Spannungsversorgung: DC 5~24V
Stromverbrauch: 60mA (DC12V) / ≤ 2.5 W
Schutzklasse: IP68
Betriebstemperatur: -30°C~+75°C, RH 95% MAX.
Dimensionen: 18 mm Ø
Gewicht: 20 g
Grün: Auf GND für invertiertes Bild
4.0 m
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ZE-RVC90MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-RVC90MT in the language / languages: English, German as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info