729844
2
Zoom out
Zoom in
Previous page
1/2
Next page
MONTAGEANLEITUNG
HAUPTMERKMALE
Kompakte 45° Universal Rückfahrkamera
Systemdesign für einfache Montage und Nutzung als Front- oder Rückfahrkamera
Detailliertes kontrastreiches Bild auch bei Dämmerung
• 3-teiliges auftrennbares Systemkabel mit 0.7 m + 7.0 m + 0.7 m Längen
Normale oder gespiegelte Bildausgabe wählbar
Aluminium Druckguss Gehäuse mit M6 Durchbruch Befestigungsschraube
BITTE BEACHTEN:
Verwenden Sie ausschließlich das mitgelieferte Anschlusskabel. Bei Nichtbeachtung erlischt Ihr Garantieanspruch.
Die Kamera ist nach der DIN EN Schutzklasse IP69K vor dem Eindringen von Schmutz- und Salzwasser geschützt.
Sollte die Kamera jedoch Hochdruckwasser-Reinigungsgeräten (Dampfstrahl) ausgesetzt werden, können selbst IP69K
spezifizierte Modelle durch eindringendes Wasser beschädigt werden. Es ist daher ein Abstand von mind. 100 cm von
der Strahldüse zur Kamera einzuhalten.
BESCHREIBUNG:
Die ZENEC ZE-RVC45DT Rückfahrkamera wurde entwickelt für universelle Verwendung und ermöglicht die Nachrüstung von
vielen Fahrzeugen aufgrund der sehr kompakten Bauform. Das normal oder gespiegelt konfigurierbare Bild ermöglich den Einsatz
als Front- oder Rückfahrkamera. Die ZE-RVC45DT überzeugt ausserdem mit ihrem grossen horizontalen Sichtfeld von 140° und
der daraus resultierenden guten Übersicht.
Dieses Produkt ist kompatibel mit einer großen Auswahl an 2-DIN A/V Gerätemodellen des Nachrüstmarkts und der ZENEC E>GO
Produktlinie mitsamt den ZENEC 2-DIN Infotainern und Naviceivern.
Installieren Sie die Kamera in die Hal-
terung Ihrer Nummernschildbeleuch-
tung. Entfernen Sie dazu die Halterung
und bohren Sie ein Ø 6,5 mm Loch.
lnstall the ZE-RVC45DT in the license
plate illumination lights panel. Take off
the panel and drill a hole of Ø 6.5 mm.
ZE-RVC45DT
RÜCKFAHRKAMERA
Führen Sie das Kabel und das Ge-
winde durch das Loch und befes-
tigen Sie die Kamera mit Scheibe
und Mutter.
Put the cable and the thread though
the hole and fasten the camera with
its ring and screw nut.
Verlegen Sie das Kabel nach vor-
ne und montieren Sie die Halte-
rung wieder.
Run the cable to the front and as-
semble the light’s panel.
Rückfahrkamera im Alumi-
nium Druckguss Gehäuse
mit M6 Durchbruch Befesti-
gungsschraube.
Rear view camera with alu-
minium die-cast housing
and M6 threaded tube.
Rot: KAMERA PWR (+12V)
Video Out
(mit Moni-/Naviceiver verbinden)
7.0 m
0.7 m
0.7 m
Schwarz: GND
Heckkamerabetrieb: Grünes Kabel offen
Frontkamerabetrieb: Grünes Kabel verdrillt
M6 Nylon Mutter*
* Drehmoment 20Nm
2A Sicherung
ZE-RVC45DT: 10R-0514099
E13, 10R-0514099
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ZE-RVC45DT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-RVC45DT in the language / languages: English, German as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info