539204

Zelmer SB1001 Manual

50
Zoom out
Zoom in
Previous page
1/50
Next page
54 SB1001-001_v01
Do not exceed the maximum content level
indicated on the grinder container.
2
Place and twist the grinder base with blade unit onto the
grinder container thread.
3
Turn the grinder upside down and mount it onto the
motor unit (1), so that the symbol on the motor unit (1) is
in line with the mark on the grinder base.
4
Turn the grinder (13) clockwise to lock it in place, so that
the symbol on the motor unit (1) is in line with the mark
on the grinder base.
5
Start the appliance.
We recommend you to use the “PULSE”
programme or set the appliance at the
maximum speed.
Use the mill to grind one type of product only.
Grinding of various products immediately one
after another without careful washing may
result in diffusion of odour and/or avour from
one product to another one.
The stand blender should not be running
continuously for more than 30 seconds with
the grinder. Switch the appliance off after 30
seconds, and wait another 30 seconds before
you run it again.
6
When the grinding has been nished, set the knob in the
”OFF” position and unplug the appliance from the mains
socket.
7
Turn the grinder, so that the mark on the grinder lid is
in line with the symbol on the motor unit. Then remove
the grinder from the motor unit.
Always wash the grinder container and the base
with blade unit in warm water with washing-up
liquid immediately after use. Wipe the grinder
sealing ring with a damp cloth.
Cleaning and maintenance
Clean the appliance immediately after use to
prevent the deposits inside the blender jug.
Pour approx. 900 ml of water into the blender jug
●
(5) and
start the appliance for about 10 seconds by pressing and
holding the ”PULSE” button.
Remove the water from the blender jug
●
(5), turn it upside
down and allow it to dry.
Wash the jug
●
(5), lid (7), stopper (9) and blade unit (11) in
warm water with washing-up liquid, if necessary.
Rinse it under the stream of clean, running water, and
●
dry it.
If you have a large quantity of ingredients to
process, do it at several stages. Take a small
amount to begin with, start the appliance for
a short while, and then switch it off. Add another
small portion of the ingredients. Make sure that
you do not exceed the attachment sieve level.
Repeat the actions until all ingredients are
blended.
Always remove the attachment for centrifuging
juice from soft fruit and soy beans (10) from the
jug, and wash it in warm water with washing-up
liquid immediately after use.
PREPARING SOY BEAN MILK
Pour ca. 900 ml of water through the opening in the lid into
the jug with the attachment for centrifuging juice from soft
fruit and soy beans mounted on the motor unit. Then pour
ca. 200 g of soaked soy beans.
Soak soy beans in water for 6 to 12 hours
before blending.
Process the soy beans for 60 seconds at a maximum speed,
and stop the appliance. Wait for 60 seconds, and then repeat
the action until the soybean mass is uniform.
Pour thus obtained soybean milk into a saucepan, and cause
it to boil. You can add some sugar to the milk to improve its
taste. The milk can be served hot or cold.
After operation
Set the knob in the “OFF” position to switch the appliance
off.
Use one hand to hold the motor unit
●
(1) and the other
one to grab the jug holder (6).
Turn the jug so that the mark
●
on the jug is in line
with the symbol on the motor unit, and remove the
blender jug from the motor unit.
Remove the lid
●
(7) from the blender jug (5).
Unplug the appliance from the mains socket if you do not
●
intend to use it any longer.
Grinder
D
The coffee grinder has been designated for grinding and
milling of such ingredients as pepper, coffee beans, rice,
wheat, sesame seeds, nuts (shelled), etc.
The grinder has not been designated for
grinding down very hard ingredients such as
ice cubes or nutmeg.
Never use the grinder for grinding sugar as this
may damage the appliance.
1
Put the ingredients into the grinder container.
… 50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer SB1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer SB1001 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info