538803

Zelmer SB1000 Manual

43
Zoom out
Zoom in
Previous page
1/44
Next page
49
SB1000-001_v01
Cleaning and maintenance
Clean the appliance immediately after use to
prevent the deposits inside the blender jug.
Pour approx. 750 ml of water into the blender jug
●
(5) and
start the appliance for about 10 seconds by pressing and
holding the “TURBO” button.
Remove the water from the blender jug
●
(5), turn it upside
down and allow it to dry.
Wash the jug
●
(5), lid (7), stopper (9) and blade unit (10)
in warm water with washing-up liquid, if necessary.
Rinse it under the stream of clean, running water, and
●
dry it.
If you left the pitcher for a long time without cleaning and
●
the pieces of mixed ingredients stuck to the inside of the
pitcher, use a nylon brush.
Do not wash the blender jug
●
(5), lid (7), stopper (9),
coffee grinder (12) or blade unit (10) in a dishwasher.
Aggressive cleaning agents may damage the surface of
the accessories.
Wipe the motor unit
●
(1) casing with a soft, damp cloth.
Never immerse the motor unit (1) in water or
any other liquid.
Do not clean the motor unit casing
●
(1) with aggressive
detergents, such as emulsion, milk, paste, etc. They can
remove the graphic symbols.
Never clean the glass blender jug
●
(5) and the grinder
container (13) with coarse sponges.
Dry all elements of the appliance thoroughly after washing.
●
BLADE UNIT ASSEMBLY
1
Place the sealing ring (11) onto the blade unit ange (10).
2
Remove the lid (7) from the blender jug (5), pulling the
locked stopper with level indication (9).
3
Turn the blender jug (5) “upside down”, and put it on
a stable, level surface.
4
Insert the blade unit (10) into the opening at the bottom
of the blender jug (5).
5
Hold the blender jug (5) with one hand, and turn the
blade unit anticlockwise with the other hand, until you feel
the resistance.
The twisting direction is shown at the bottom
of the blade unit.
BLADE UNIT DISASSEMBLY
1
Unplug the appliance from the mains socket.
2
Remove the lid (7) from the blender jug (5) pulling the
locked stopper with level indication (9).
3
Remove the content of the blender jug (5).
4
Clean the blender jug (see “Cleaning and Maintenance”).
Turn the blender jug (5) upside down, and put it on a stable,
level surface.
D
E
Before chopping, remove the veins, membranes
and fat from the meat, and then chop it into
pieces of approx. 2x2 cm in size.
1
Put the ingredients into the grinder container.
Do not exceed the maximum content level
indicated on the grinder container.
2
Put the grinder base (15) with blade unit into the grinder
container (13). Make sure that the grinder base sealing ring
is xed tightly to the narrowing in the grinder container.
3
Grab the clutch cover, and turn the grinder base with
blade unit anticlockwise, until you feel the resistance.
The twisting direction is shown at the bottom
of the grinder base with blade unit.
4
Turn the grinder upside down, and mount it onto the
motor unit (1), so that one of the protruding elements in the
grinder lid ts in the cut-out in the motor unit.
5
Turn the grinder (12) clockwise to lock it in place, until you
feel the resistance. The control panel illumination will go on.
6
Run the appliance.
We recommend you to use the “TURBO”
programme or set the appliance at the
maximum speed.
Set the lowest speed to obtained the best
results of grinding nuts.
Use the mill to grind one type of product only.
Grinding of various products immediately one
after another without careful washing may
result in diffusion of odour and/or avour from
one product to another one.
The grinder should not be running continuously
for more than 30 seconds. Switch the appliance
off after 30 seconds, and wait another 30
seconds before you run it again.
7
When the grinding has been nished, switch the
appliance off pressing the ON/OFF button . Unplug the
appliance from the mains socket.
8
Turn the grinder anticlockwise so that the protruding
element in the grinder lid ts in the cut-out in the motor unit.
9
Remove the grinder from the motor unit.
Open the grinder, following the instructions set forth in
●
section
3
, but in a reverse order.
Always wash the grinder container and the base
with blade unit in warm water with washing-up
liquid immediately after use. Wipe the grinder
sealing ring with a damp cloth.
… 43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer SB1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer SB1000 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer SB1000

Zelmer SB1000 Additional guide - English, Polish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info