539679

Zelmer Puris VC1260 Manual

40
Zoom out
Zoom in
Previous page
1/42
Next page
46 VC1260-001_v01
4
Turn the water tank upside down and unscrew the cap.
Fill the tank with water, replace the cap (make sure that it is
screwed all the way in) and ret the tank.
Do not use the steam mop with the steam
function with no water in the tank.
Plug in the unit to an appropriate outlet.
●
5
Slide the HEAT switch to the ON position.
6
The unit will start heating water. The HEAT indicator light
will illuminate.
When the STEAM indicator light illuminates
the unit is ready for operation with the steam
function.
7
To start operation, press and hold the trigger.
The mop will stop steaming when you release
the trigger.
If the unit runs out of water during operation,
slide the HEAT switch to the OFF position and
rell the water tank (see sections
4
and
5
).
When the micro-bre cloth becomes very wet
or dirty, replace it with a clean and dry one.
The micro-bre cloth becomes very hot when
using the steam mop. Use caution when
replacing.
In order to thoroughly sanitize an area of your
oor, wait 60 seconds for the unit to heat up,
then mop the selected area with a short forward
and backward motion for about 15 seconds.
8
After use, slide the HEAT switch to the OFF position and
wait until no steam is emitted from the cleaning head.
9
Empty the water tank and unplug the unit from the
outlet.
After use / Cleaning and maintenance
AFTER USE
When nished steam cleaning, make sure that the HEAT
●
switch is in the OFF position, then unplug the unit from
the outlet.
Pour out water from the water tank.
●
The micro-bre cloths are machine washable (at max.
●
60°C).
If the cloths are very dirty, before washing soak
them in warm water with some detergent or
stain remover.
Thoroughly dry the cloths before storage.
●
REPLACING THE WATER SOFTENING FILTER
The water softening lter helps to remove minerals from water
which may impact the performance of your steam mop. How
often the lter should be replaced depends on how hard your
water is and how often you use the unit. We suggest that you
replace the water softening lter every 6 months or so.
The degree of lter contamination may impact
the performance of your steam mop.
Before replacing the lter, unplug the unit from
the outlet.
1
Remove the water tank (see the “STEAM FUNCTION”
section
3
).
2
Pull the lter up and remove it from the unit.
3
Replace the used lter with a new one. Press the new
lter so that it touches the unit base closely.
4
Ret the water tank.
CLEANING THE ELECTROBRUSH
Over time pieces of threads, strings, hair,
fabrics, etc accumulate on the roller of the
electrobrush. They impact the sweeping
performance and therefore the roller should be
periodically cleaned (at least once monthly).
Before cleaning the electrobrush, unplug the
unit from the outlet.
The roller of the electrobrush may be removed for thorough
cleaning.
1
Turn the roller lock located at the bottom of the cleaning
head to the position.
2
Remove the roller lock and the roller from the unit.
3
Using scissors or a sharp knife, carefully clean the roller
of the electrobrush. Using scissors or a sharp knife, cut hair
or threads rolled around the roller.
Be careful no to damage the bristle and the
roller of the electrobrush.
4
When cleaned, ret the roller.
5
Ret the roller lock and turn it to the position. The
roller is now locked.
DISASSEMBLING THE HOLDER AND
STORING THE UNIT
The holder is detachable for easy storage of the unit in low
cabinets.
1
Twist the upper cord wrap downwards.
2
Unwind the cord from the wraps.
3
Press the tube lock and slide out the tube with the holder
upwards.
C
G
E
… 40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Puris VC1260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Puris VC1260 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info