538799
28
Zoom out
Zoom in
Previous page
1/28
Next page
 MM1200-001_v01
THE INSTALLATION OF THE GRINDER ON
THE DEVICE
1
When the grinder chamber (7) is turned right by about 45°,
t the assembled grinder onto the drive unit by inserting the
protrusions of the grinder chamber (7) into the recesses in the
drive unit, and then turn it left until you hear a “click” of the
lock. It means that the grinder has been attached correctly.
USAGE AND REGULATION OF THE GRINDER
Before the rst use, wash (see “CLEANING”) and dry the
disassembled grinder, and then grind around 50 grams
of product (e.g. food grain) with the grinder set to medium
grinding. The ground product must not be used because it is
contaminated and must be thrown away.
     
      







2
Fill the pan (8) with grain.
3
Set the body handle (3) to coarse grinding.
4
Turn on the mincer motor.
5
The ground product will pour out through the opening.
6
Depending on the desired grinding level or the type of
grain, adjust the burr regulator (2) with the body handle in
order to obtain the product with the adequate granulation
level. By turning it clockwise you will obtain a ner ground
product, by turning it counter-clockwise coarser ground
product.
The nest (minimum) grinding level is achieved by setting
the handle to line 1, and the coarsest (maximum) grinding
level by setting it to the STOP line. See the graphic on the
body (3) and burr regulator (2).
By attempting to twist or turn the handle beyond the
STOP line during the operation you can damage the
device.



     
      

         


      

J
J
CLEANING AND MAINTENANCE
The grinder does not require cleaning after each operation
(if one type of product is ground only), because the worm (6)
prevents the grain residues from depositing in the grinder.
Dry the steel burrs (4, 5) using a soft cloth after cleaning to
prevent corrosion. In case of long-term storage, conserve
the burrs by greasing them (you can use edible oil). Do not
immerse the burr in boiling water. The plastic parts (without
the graphic) can be washed in the dishwasher (max. 60°C).
After the work has been nished
Turn off and unplug the appliance.
1
Remove the pusher and take out the tray from the mincer
body.
2
Press the lock button, turn the mincer unit right and
remove it.
3
Disassemble the elements of the mincer unit, sausage
stufng tube.
Place the power cord as well as the cleaned and dried parts
in the storage compartment.
4
Place the screen in the recess.
5
Put away the power cord.
6
Store the tray.
Cleaning and maintenance
Clean the drive with a wet cloth, with an addition of
dishwashing liquid.
Wash the plastic parts in warm water, with addition of the
dishwashing liquid.
Wash the metal parts in hot water, with addition of the
dishwashing liquid.
Carefully dry the washed elements.
Grease the screens and the knife with edible oil in order
to protect them against corrosion.
Assemble the dry parts of the mincer unit or the
shredder.
Ecology – Protect the environment
Each user can contribute to protecting the environment. It is
neither difcult nor too expensive. To this end: have the carton
packaging recycled at the recycling centre, put
the plastic bags into the plastic (PE) waste
container. When worn out, bring the appliance
to the appropriate waste collection centre as
some of its components can be hazardous to
the environment.

K
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper operation of the appliance.
The manufacturer reserves the right to modify the product at any time,
without prior notice, in order to adjust it to legal regulations, standards
and directives or due to constructional, commercial, aesthetic and
other reasons.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer MM1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer MM1200 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer MM1200

Zelmer MM1200 Additional guide - English, Polish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info