540102
30
Zoom out
Zoom in
Previous page
1/32
Next page
30 HD1400-001_v01
Cleaning and maintenance of hair dryer
After each use, always turn off the appliance and unplug
the power cord from the electrical outlet.
Never put hair dryer, power supply cord or plug in water
or any other liquid.
It is recommended to remove the air inlet cover
(2) from
time to time in order to clean it and to clean the air inlet
(3), located under the cover.
When required clean hair dryer casing with a dump cloth
(it can be moistened with some washing-up liquid) dry it
out or wipe it till dry.
Do not use scrubbing agents or solvents.
Carefully dry all the parts which have been cleaned.
CLEANING AIR INLET COVER AND NETLIKE FILTER
(Fig. B)
1
Remove the air inlet (2) by turning it counter-clockwise to
the position .
Clean the air inlet and wipe it with a dry or slightly damp
cloth. After drying place it in the previous place.
2
Replace the air inlet cover (2) that three latches located
on the air inlet cover hit the holes on the body of the dryer.
3
Turn the air inlet cover (2) clockwise to the position .
STORAGE
If your hair dryer is not in use, always unplug the power
cord from the electrical outlet.
After use wait till the hair dryer cools down and place it in
a dry, cold and unavailable to children place.
Never turn the cord around hair dryer as it causes the
risk of premature wear risk of cord damage. In order to
ensure its long lasting operation the cord is to handled
with care, avoiding tugging, twisting or pulling, especially
when unplugging. If the cord gets twisted during
operation it should be straightened from time to time.
Ecology – Taking care of the environment!
Each user can contribute to protection of environment. It is
neither difcult nor too expensive. To do it:
Cartoon packaging is to be disposed of
as waste paper. Polyethylene (PE) foil
packaging is to be placed in a container for
plastic. Used appliance is to be returned to
a proper collection point, as dangerous parts
of the appliance can cause environmental
hazard.
Do not throw it out together with household garbage!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer HD1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer HD1400 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info