539208
70
Zoom out
Zoom in
Previous page
1/72
Next page
70
GW23-011_v01
After setting the continuous function (Co), press the DESIRED button (L) once again to
return to the beginning of the cycle – 40%. Changes are visible on the LED display (3).
NOTE: Wait a few seconds after setting the mist output and then set the relative
humidity.
3. Humidity level selection button (J)
Press the humidity level selection button (J) to set the amount of mist generated by
the humidier. The possible settings are as follows: 1, 2, 3, 4 and TURBO. Changes
are visible on the LED display (3).
NOTE: Wait a few seconds after setting the relative humidity and then set mist
output.
4. STERILIZATION button (M)
Press the STERILIZATION button (M) to switch on the warm mist function. Water
will heat up to 80ºC. Press the button again to switch off the warm mist function and
to return to the cool mist function.
5. TIMER button (N)
Press the TIMER button (N) to set the switch-off time. The timer can be set to 1, 2,
4 or 8 hours and continuous (CO). After setting the continuous function (Co), press
the TIMER button (N) once again to return to the beginning of the cycle starting from
1 hour. Changes are visible on the LED display (3).
6. AU/SLEEP button
a) Press the button once to set the AUTO mode. The appliance will automatically set
the warm mist mode to keep the humidity at 50%.
NOTE: When in the AUTO mode the desired humidity and the humidity level
cannot be adjusted. Doing so will deactivate the AUTO mode.
b) Press the button for the second time to set the SLEEP mode. The humidier will
automatically set the timer to 8 hours, then activate the warm mist mode to keep the
room humidity level at 60%.
NOTE: When in the SLEEP mode the desired humidity and the humidity level
cannot be adjusted. Doing so will deactivate the SLEEP mode.
c) Press the button for the third time: the AUTO and SLEEP modes will be switched off.
NOTE: When the water tank is empty, the unit will chime and the WATER EMPTY
(A) symbol will be shown on the LED display. The fan will operate for another
2 minutes and then the appliance will automatically switch off. Do not press any
buttons. Fill the tank with water and the appliance will restart automatically.
Cleaning and maintenance
Clean the appliance at least once a week.
1. Press the POWER button (K) to switch off the appliance and unplug the unit before
cleaning.
2. Remove the water tank (5).
3. Empty the water tank (5) and the base (6). Clean the inside of the tank with a mild
detergent.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 23Z052 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 23Z052 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info