538919
54
Zoom out
Zoom in
Previous page
1/56
Next page
54
WATER CONTAINER PROTECTION
This appliance is equipped with an internal water contain-
er (D) which is fastened with a band to protect the water
lever switch during transportation. Before the initial use,
remove the water container from the appliance and re-
move the band (see picture below). Gently replace the
water container back to its original position. Do not press
the water container, it may cause the failure of the appli-
ance.
When the water in the water container reaches a prede-
termined level, the display will show “P1: and the water
full indicator will start to ash (red). Gently remove the
water container and dispose of the water (see picture
below). Replace the water container back to its original
position. The red light will stop ashing and the “P1” sym-
bol will disappear. The appliance will continue to operate
properly.
Note: Remove the water container slowly to prevent water from splashing. The water full indicator will begin to ash and the display
will show the symbol “P1” when the water container is removed / displaced or when the predetermined water level is reached.
CLEANING AND MAINTENANCE
1. Unplug the appliance before cleaning.
2. Do not use abrasive detergents such as emulsions, cream cleaners, polishes, etc. to
clean the housing. They may remove the graphic information symbols.
3. Wipe the housing with a damp cloth. Do not wash the appliance directly under a tap or
using a water hose. Electric shock risk.
4. If the air lter is blocked with a large amount of dust, the air ow volume will be re-
duced. Clean the air lter every two weeks.
Opening and cleaning the air lter
1. Remove the lter cover and take out the air lter.
2. Wash the air lter by immersing it gently in warm water (about 40°C) with a neutral de-
tergent. Rinse the lter and dry in a shady place.
3. Attach the lter to the lter cover using the attachment hooks on the inner surface of the
cover.
4. Put the ler cover back to the appliance.
Power cord and plug
Pull the projection to open the power cord compartment.
Keep the power cord and plug clean. Roll up the power cord and store it in the power com-
partment if the appliance is not used for a long time.
BEFORE THE START OF THE SEASON
1. Check if the air inlets and outlets are not blocked.
2. Make sure the air lter is properly installed before operating the air conditioner. If the
air lter removed, dust and foreign objects may result in faulty performance of the appli-
ance.
BEFORE THE END OF THE SEASON
1. Switch off and unplug the air conditioner.
2. Clean the air lter and other parts.
3. Remove the water container. Beside the continuous drain hose you will nd a section of
hose that is plugged at the end. Remove the plug from the hose. Water from the bottom
tray will be removed through the drain hose.
4. Cover the appliance to protect it from dust and dirt.
Band
Remove
the drain plug
Hose
Band
Power cord
compartment
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 23Z010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 23Z010 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info