Manual Zelmer 17Z016 (page 46 of 48) (English, Polish)

538871

Zoom out

Zoom in

1/48

The kettle switches off automatically when the water has reached –

the boiling point, the switch returns to its starting position – the light

comes off.

If further use of the kettle is anticipated, it is not necessary to remove –

the plug of the connecting cord from the power socket.

WARNING: Be careful not to ll up with water beyond the nominal capac-

ity when pouring water into the kettle. The rising of the water level in the

kettle is delayed in relation to the speed of pouring the water. It is caused

by the lter slowing down the speed of the ow. This can be prevented

by pouring the last portions of water extremely carefully before it reaches

the maximum level on the indicator.

In the event that an empty kettle is switched on, it will be switched off by

a thermal device automatically.

In order to switch the kettle on again after it has cooled down (approx.

15 minutes), take it off the base, replace it and switch the kettle on by

pressing switch (6). The cooling down of the kettle can be accelerated by

puring cold water into the kettle.

1. Description of the function selection buttons: keep warm/boiling

Both switches (boiling and keeping warm) may be used together or sepa-

rately to allow activation of different functions.

Press the boiling button – (6) – the kettle will automatically switch off

after the water has boiled.

Press the „keep warm” button – (7) – the kettle will quickly warm up

water to the pre-set temperature and will keep it warm at this tem-

perature.

Press both buttons together – rst the kettle will boil the water and –

then, after reaching the pre-set temperature, it will keep the tempera-

ture.

Press the boiling button – (6) or „keep warm” button (7) again to cancel

the settings.

Each activity, pressing a button or another action, is accompanied by –

a signal sound.

2. „Keep warm”

The number of settings and the temperature of different settings is

changeable; it may be adjusted to an individual customer’s needs.

3. Lighting:

Boiling mode – change of colour from blue to red. –

Keep warm mode – soft, changing lighting illumination. –

Keep warm function – the color of the lamp indicates the set tem- –

perature.

Cleaning and maintenance

Always clean a cold kettle! –

Remove the plug of the connecting cord from the power socket. –

Take out the lter – (9).

Clean the outside surfaces with a soft cloth moistened with washing- –

up liquid.

In order to remove the build-up of hard water lm from the outside –

and inside walls of the kettle, wipe them with a cloth moistened with

vineger.

Rinse the kettle with fresh water. –

Filter replacement – descaling

In the event that scale builds up on the bottom of the kettle, it needs to be

removed. 6% or 10% vinegar is used for this purpose.

Open the lid – (5).

Take out the lter – (9).

Wash the lter under running water. –

Pour 0.5 l of vinegar and switch on the kettle. –

Boil the vinegar and leave in the kettle for about 30 minutes. –

Pour the vinegar out and rinse the kettle with fresh water. –

Fill the kettle up with fresh water, boil the water and pour it out after –

is has boiled.

Repeat the above procedure if there still is scale on the bottom. –

When the procedure is nished, replace the ter – (9) in the kettle, fol-

lowing the procedure of taking the lter out in reverse order.

Negligence in descaling the kettle may results in its damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 17Z016 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 17Z016 Manual

Product: