517530
2
Zoom out
Zoom in
Previous page
1/36
Next page
2
User’s manual
EN
GENERAL INFORMATION
INTRODUCTION
Congratulations on having purchased this product, which we are sure will satisfy your requirements and meet your expectations. This is a
ZUCCHETTI CENTRO SISTEMI S.p.A. project. Zucchetti (a UNI EN ISO 9001 certi ed company) is a software house which, since 1982, has
consolidated its activity and presence on the international market. Applying advanced informatics solutions for the industrial automation means
optimizing production activities and simplifying work procedures. This product derives from the constant research activity of the ZUCCHETTI
laboratories.
PURPOSE OF THE MANUAL
This manual forms an integral part of the appliance and was produced by the Manufacturer to provide the necessary information to people
authorised to interact with it during its expected working life.
Operators of the appliance must adopt correct working techniques and must carefully read and follow the instructions contained in this
manual.
This information is provided by the Manufacturer in its original language of Italian and may be translated into other languages for legal and/
or commercial purposes.
Carefully read the instructions in this manual to avoid unnecessary risks relating to personal health and safety and economic damages.
Keep this manual in a safe and easily accessible place for quick reference.
Some information and illustrations contained in this manual may not perfectly correspond to the appliance in your possession, however, this
does not compromise its functioning.
The Manufacturer has the right to make changes without notice.
The following systems are used throughout this manual to highlight particularly important information or to indicate important speci cations.
Danger - Attention
This symbol identi es situations of imminent danger, which, if ignored, could lead to serious bodily injury or death.
Warning - Caution
This symbol identi es situations where it is necessary to behave in a certain way to avoid serious serious bodily injury
and to protect the robot.
Important
This symbol identi es particularly important technical information, , if not followed, could lead to damage to the robot.
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The data plate shown is applied directly onto the appliance. It contains
references to information which is essential for safely operating the robot.
For any technical requirements, please contact the Manufacturer’s
Technical Service Centre or an authorised centre. For technical assistance,
indicate the data reported on the data plate, the approximate operating
hours and the type of fault detected.
A. Manufacturer Identi cation.
B. EC conformity label.
C. Model / Serial number / Manufacturing year.
D. Technical speci cations.
(C) Manufacturing year
(C) Model
(B) EC conformity label
(A) Manufacturer Identification
(D) Technical specifications
(C) Serial number
DATA PLATE
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZCS 9L2BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZCS 9L2BL in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZCS 9L2BL

ZCS 9L2BL User Manual - Dutch - 56 pages

ZCS 9L2BL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info