22313
15
Zoom out
Zoom in
Previous page
1/19
Next page
Certain problems are due to lack of simple maintenance
or oversights and can be solved easily without having to
call out an engineer.
The machine will not start
The door has not been properly closed.
The plug is not properly inserted in the power socket.
There is no current at the socket. Check the fuse.
This dishwasher may display a fault code in the pilot
lights of the programmes which will assist you in iden-
tifying the fault.
If the pilot light ON//OFF is not illuminated and one of
the programme’s pilot light is flashing please carry out
the following checks.
If the pilot light of the RINSE AND HOLD
programme is flashing
The dishwasher will not fill with water
The water tap is closed.
Open the tap. Switch off the dishwasher; switch it
back on and start the wash programme. If the
alarm reappears, call the Service Centre.
Mains water supply cut off.
Wait for the supply to be restored.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
Water feed pipe bent or squashed.
Reposition the pipe (see instructions for connection
to the water supply).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
Filter in the water feed pipe clogged.
Close the water tap, unscrew the water feed pipe
and thoroughly clean the filter. Screw the pipe back
on and open the water tap.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
If the pilot light of the INTENSIVE
programme is flashing
The filters are clogged.
Clean the filters (see Maintenance section).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears
call the Service Centre.
if the pilot light of the QUICK programme
is flashing
The dishwasher does not empty out water
The discharge pipe is bent.
Eliminate the bend ( see instructions for connection
to the drain).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
The sink drain is blocked.
Unblock the sink drain pipe.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
The discharge pipe extension is not correct.
Carefully follow the instructions for “Connection to
the drain”.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
The wall drain connection has no breather.
Consult a qualified engineer.
If the pilot light of the NORMAL o
ECONOMY programme is flashing
General.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
SERVICING
PRA10GB
32
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZI457 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZI457 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZI457

Zanussi ZI457 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info