528971
3
Zoom out
Zoom in
Previous page
1/36
Next page
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
glass door since they can scratch the surface, which may result in shattering
of the glass.
To remove the shelf supports first pull the front of the shelf support and then
the rear end away from the side walls. Install the shelf supports in the oppo-
site sequence.
Safety instructions
Installation
Warning! Only a qualified person must install this
appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with the ap-
pliance.
Always be careful when you move the appliance be-
cause it is heavy. Always wear safety gloves.
Do not pull the appliance by the handle.
Keep the minimum distance from the other applian-
ces and units.
Make sure that the appliance is installed below and
adjacent safe structures.
The sides of the appliance must stay adjacent to ap-
pliances or to units with the same height.
Electrical connection
Warning! Risk of fire and electrical shock.
All electrical connections should be made by a quali-
fied electrician.
The appliance must be earthed.
Make sure that the electrical information on the rat-
ing plate agrees with the power supply. If not, con-
tact an electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension ca-
bles.
Make sure not to cause damage to the mains plug
and to the mains cable. Contact the Service or an
electrician to change a damaged mains cable.
Do not let mains cables to come in touch with the ap-
pliance door, specially when the door is hot.
The shock protection of live and insulated parts must
be fastened in such a way that it cannot be removed
without tools.
Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
If the mains socket is loose, do not connect the
mains plug.
Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
Use only correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.
The electrical installation must have an isolation de-
vice which lets you disconnect the appliance from
the mains at all poles. The isolation device must
have a contact opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns or electric shock or
explosion.
Use this appliance in a household environment.
Do not change the specification of this appliance.
Make sure that the ventilation openings are not
blocked.
Do not let the appliance stay unattended during op-
eration.
Deactivate the appliance after each use.
Be careful, when you open the appliance door while
the appliance is in operation. Hot air can release.
Do not operate the appliance with wet hands or
when it has contact with water.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KOB55602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KOB55602 in the language / languages: English, German as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker KOB55602

Zanker KOB55602 User Manual - Dutch, French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info