680139
6
Zoom out
Zoom in
Previous page
1/12
Next page
Network Settings
DHCP: By default, the base station attempts to contact a DHCP server in your network
to obtain the valid network settings, e.g., IP address, subnet mask, gateway
address and DNS address.
Static: If the base station cannot contact a DHCP server for any reason, you need to
configure the IP address, subnet mask, gateway address, primary DNS address
and secondary DNS address for the base station manually.
You can configure the base station to obtain network settings in one of the following
ways:
5
To configure the network parameters for the base station manually:
1.Press the OK key to enter the main menu, and then select Settings->System
Settings->Network (default PIN: 0000)->Basic.
3.Press to select the corresponding IP address mode.
2.Select the desired IP address mode from the IP Mode field.
4.Make the desired changes.
5.Press the Save soft key to accept the change.
Note:
The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6
is disabled by default.
Wrong network settings may result in inaccessibility of your DECT phone and may
have an impact on the network performance. For more information on these
parameters, contact your system administrator.
Note:
After the success of registration, the handset LCD screen prompts “Handset
Subscribed” and “Base NO. (last 4 characters of connected Base’s MAC address)” .
If the handset LCD screen prompts “Searching for Base”, please check if your base
station is powered on.
You can also press the OK key to enter the main menu, and then select Settings->
Registration->Register Handset
and repeat steps 2-4 to register multiple
base stations
.
4.Enter the base PIN (default: 0000), and then press the Done soft key to complete
registration.
searching the base.
3.Press the OK soft key after searching a base successfully.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W56H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W56H in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink W56H

Yealink W56H User Manual - English - 96 pages

Yealink W56H Quick start guide - German - 17 pages

Yealink W56H Quick start guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info