799363
53
Zoom out
Zoom in
Previous page
1/56
Next page
| Troubleshooting | 53
3. Configure and save the following settings:
Parameter Description
Only Accept Trusted
Certificates Enable or disable the camera only trusting the server certificates
in the trusted certificates list.
Default: enabled.
If it is disabled, the camera connects to the server no matter
whether the certificate send by the system is valid or not.
If it is enabled, the camera will verify the server certificate based
on the trusted certificates list. The camera will connect to the
server only after the verification succeeds.
If you change this parameter, the system will reboot to make the
change take effect.
Common Name Validation Enable or disable the camera to mandatorily validate the
CommonName or SubjectAltName of the server certificate sent
by the server. This security verification rules are compliant with
RFC 2818.
Default: disabled.
CA Certificates Specify the certificate type when the camera verifies the server
certificate.
Default Certificates—the camera verifies whether the server
is reliable via the built-in CA certificates.
Custom Certificates—the camera verifies whether the server
is reliable via the uploaded CA certificates.
All Certificates—the camera verifies whether the server is
reliable via both the built-in and the uploaded CA certificates.
Default: Default Certificates.
Import Trusted Certificates You can upload a custom CS certificate for the camera.
Note: The certificate must be in .pem, .der., .crt, or .cer file
format. You can upload up to 10 CA certificates.
Default Certificates List
Default Certificates List
The following introduces 95 most common used CA certificates built in UVC40.
Equifax Secure Certificate Authority
COMODO RSA Certification Authority
Starfield Services Root Certificate Authority - G2
USERTrust RSA Certification Authority
GeoTrust Global CA 2
thawte Primary Root CA - G3
Yealink Root CA 2
StartCom Certification Authority
thawte Primary Root CA
ISRG Root X1
GlobalSign
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink RoomConnect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink RoomConnect in the language / languages: English as an attachment in your email.

The manual is 8.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info