799363
5
Zoom out
Zoom in
Previous page
1/56
Next page
| About This Guide | 5
About This Guide
This guide is intended for the administrators who need to configure and manage MVC system or Zoom
Rooms system.
This guide applies to all the devices of MVC system or Zoom Rooms system.
Introduction of Yealink RoomConnect
Summary of Changes
Introduction of Yealink RoomConnect
As a software running on the mini-PC, Yealink RoomConnect can automatically identify the devices
connected to the MVC system (MVC and MVC series) and Zoom Rooms system, including MShare,
MTouch Ⅱ, cameras, or audio devices, providing you with the camera management and other advanced
settings.
Before using Yealink RoomConnect, you need to log into Windows as the administrator. You can manage
all the devices directly on Yealink RoomConnect, including the Camera-Hub, UVC cameras, MShare,
VCM38, VCM34, MSpeech, CP900, CPW90-BT, Soundbar, CP960, and MTouch Ⅱ. Also, you can
manage devices, diagnose devices, and view the alarm on Yealink Device Management Platform (YDMP)/
Yealink Management Cloud Service (YMCS) if you connect all the devices to YDMP/YMCS via Yealink
RoomConnect.
Yealink RoomConnect is installed on the mini-PC by default, and you can update Yealink RoomConnect by
using Windows update or enabling the auto-update.
The detailed information in this guide applies to Yealink RoomConnect in version 2.2.33.0 or later.
The firmware version of the devices connected to the MVC or Zoom Rooms system should meet the
following requirements:
Camera-Hub: 84.421.0.5.rom or later
UVC86: 151.410.0.5.rom.rom or later
UVC84: 262.410.0.15.rom or later
UVC80/UVC50: 92.421.0.5.rom or later
UVC30: 128.410.0.10 or later
UVC30: 105.420.0.5.rom or later
Content Camera: 105.421.0.5.rom or later
MShare: 94.421.0.10.rom or later
MTouch Ⅱ: 126.410.0.3.rom or later
MSpeech: 136.410.0.10.rom or later
CP900: 100.420.0.5.rom or later
CP960 (Zoom Room version): 73.30.0.30.rom or later
Note: If your firmware version is lower than the requirements, you need to upgrade them first
before connecting them to Yealink RoomConnect.
Summary of Changes
Changes for Guide Version 3.0
Changes for Guide Version 2.6
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink RoomConnect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink RoomConnect in the language / languages: English as an attachment in your email.

The manual is 8.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info