779791
15
Zoom out
Zoom in
Previous page
1/15
Next page
28 29
TROUBLESHOOTING CE DECLARATION
Declaration of Conformity
We
Sumec UK
Unit A&B Escrick Business Park Escrick,York YO19 6FD
Declare that the product:
Description: 40V CORDLESS LAWNMOWER
Y0J-SP01-3236
LM G32
Function: Cutting grass
Complies with the essential health and safety requirements of the following directives:
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2004/108/EC
RoHS Directive 2011/65/EU
Noise Emission in the Environment by Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
Conformity Assessment Procedure as Per Annex VI
Measured Sound Power Level: 89.58 dB (A)
Declared Guaranteed Sound Power Level: 96 dB (A)
Standards and technical specification referred to :
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 60335-1:2012+A11
EN 60335-2-77:2010
EN 60335-2-29:2004+A2
EN62233:2008
EN 50581:2012
Authorized Signatory
Date: 11.10.2017
Signature:________________________
Place: York
Name: Mariana Hall
General Manager
SUMEC UK Co.,Ltd.
Unit A&B Escrick Business Park
Escrick,York YO19 6FD
WARNING: Before performing any repair work, always ensure that the battery pack
has been removed.
WARNING: Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Fault/malfunction Cause Remedy
Mower fails to start
Safety key is not inserted Insert safety key
Battery is not correctly inserted Remove the battery and reinsert
Mower standing in high grass
Start motor on shorter grass or
already mowed area, change cutting
height if necessary
The mower housing is clogged Clean housing so that the blade can
move freely
Battery has no power Check and recharge battery
Mower stops working
/loses power
Cutting height is incorrect Adjust the cutting height
Cutting blade is worn or
damaged
Replace with new blade from dealer
service centre
Battery performance
decreasing
Check the battery performance and
charge it if necessary
Grass bag is not lled
sufciently
Cutting height is too low Adjust and increase cutting height
The lawn / grass is wet Allow the lawn to dry
Underside of the mower deck
is clogged.
Clean the underside of the mower
deck
Cutting blade is worn or dam-
aged.
Replace it by contacting the custom-
er service centre
Mower vibrating at
higher speed
Cutting blade is unbalanced Balance the blade by grinding each
cutting edge until equal
Blade is loosened /incorrectly
tted Tighten the blade bolt
Mower cuts unevenly
The blade is damaged. Sharpen the blade or replace.
Blade is assembled incorrectly. Re-assemble blade correctly.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce LM G32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce LM G32 in the language / languages: English as an attachment in your email.

The manual is 4.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info