799184
2
Zoom out
Zoom in
Previous page
1/3
Next page
PW-610/611 INSTRUCTION MANUAL
POWER WALKER
TM
‑2‑
5.
HOW TO DO INITIAL SETTING
Time Setting
0:00 to 23:59 (24 Hours Display)
Stride Length
30 to 180 cm (each 1 cm) for PW-610
1.00
to 6.00 feet (each 0.25 feet) for PW-611
Body Weight 30 to 120 kg (each 1 kg) for PW-610
70 to 300 lb (each 1 lb) for PW-611
Please do not forget setting date before
you using POWER WALKER .
SETTING DATA
TM
1)Time setting
Press "/SELECT" button (keep press
for more than 2 second)
"Hour" blinking
Press button to increase or button
to decrease data.
Press "/SELECT" button
"Minute" blinking
Press button to increase or button
to decrease data.
Press "/SELECT" button
2)"Stride Length" blinking
(*Stride Length setting)
Press button to increase or button
to decrease data.
Press "/SELECT" button
3)"Body Weight" blinking
(Body Weight setting)
Press button to increase or button
to decrease data.
4)Press MODE green button when you
finish initial setting.
SET
SET
SET
SET
First of all, please make sure Display shows
Normal Walking mode (not PW mode nor
7 DAYS Memory mode).
SETTING PROCEDURES
*Stride Length setting
For measuring the distance coverage,
it is important to keep regular strides and
maintain your walking form. To determine
your average stride length, please walk
10 steps as illustrated below. Then please
measure distance (toe to toe) of your 10
steps and divide distance by10. You can
calculate your average one step (stride
length).
1)Auto Memory and Reset
The Number of Steps and Consumed
Calorie of the day are automatically stored
in memory device in Power Walker
at 2:00 am every day up to 7 days ago.
So at 2:00 am, Display shows zero(0).
2)How to Recall the 7 Days Records
Please press MEMORY button first in
Normal Walking mode. Display shows
The Number of Steps and consumed
calorie of the previous day (One(1) day
ago). To continue recall records of each
day, press ▲/RESET button or /MEMORY.
6. 7 DAYS MEMORY
STEP
dayagokcal
STEP
km
kcal
dayagokcal
MW.Time H POWER
STEP
dayagokcal
STEP
dayagokcal
....
STEP
km
kcal
dayagokcal
MW.Time H POWER
STEP
dayagokcal
STEP
dayagokcal
....
STEP
kcal dayago
7. BATTERY CHANGE
Battery life time is approx 1 year.
You can purchase replacement battery
CR2032 at grocery store, electronic retail
shops, etc.
Please use coin to open battery case and
change battery. Please make sure that
Plus(+) side is facing up.
BATTERY CR2032
MADE IN JAPAN
Battery Case
Battery(CR2032)
8. RESET
1)Manual Reset
If you want to clear record of the day,
please press /RESET button for approx
2 seconds until display shows zero(0)
in Normal Walking Mode or PW mode.
2)Auto Reset
At 2:00 am every day, the data of Number
of Steps and Consumed Calorie are
automatically saved in Memory Device
in POWER WALKER. Then display shows
zero(0).
3)System Reset
When you want to delete all personal data
and walking record and to be in factory
default mode,
please put small stick
in RESET whole
and push button
on the back case.
Push
BATTERY CR2032
MADE IN JAPAN
When unusual segment or irregular item
is displayed due to electric trouble.
Right after changing battery.
We strongly recommend you do this System
Reset operation only -
After you complete system reset procedure,
please start initial setting. (showing in
HOW TO DO INITIAL SETTING)
Please treat your products with care and
keep it in a clean place.
Please do not put your product in back
pocket.
Please do not open the case. There are
sensitive mechanism inside.
POWER WALKER is not water resident,
please do not expose your product to
liquid or moisture or humid place.
Please do not expose your product to
extreme high or low temperature place.
Please do not throw and drop your product.
CAUTION
Please do not throw your product into the
fire or explosive area. Your product may
explode.
Please keep your product and accessories
incl. battery out of the children's reach.
Please keep your product and accessories
incl. battery out of your pet's reach.
If your product or the battery is accidentally
swallowed, please contact doctor immediately.
For disposing the battery, Please check
local regulation and follow their direction.
WARNING
9.
IMPORTANT INFORMATION
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamax PW-611 Powerwalker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamax PW-611 Powerwalker in the language / languages: English as an attachment in your email.

The manual is 0.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info