599497
44
Zoom out
Zoom in
Previous page
1/47
Next page
44
YDP-101
MVoltage Selector and AC power cord.
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some areas.
To set the selector for 110V, 127V, 220V or 240V main
voltages, use a “minus” screwdriver to rotate the selector
dial so that the correct voltage for your region appears
next to the pointer on the panel. The voltage selector is set
at 240V when the unit is initially shipped.
After the proper voltage has been selected, connect the
AC power cord to the AC INLET and an AC wall outlet. A
plug adaptor may be also provided in some areas to match
the pin configuration of the AC wall outlets in your area.
An improper voltage setting can cause serious damage to the YDP-
101 or result in improper operation.
<Set the adjuster.
For stability, an adjuster is provided on the bottom of the
pedal box (C). Rotate the adjuster until it comes in firm
contact with the floor surface. The adjuster ensures stable
pedal operation and facilitates pedal effect control. If the
adjuster is not in firm contact with the floor surface, dis-
torted sound may result.
After completing the assembly, please
check the following.
Are there any parts left over?
Review the assembly procedure and correct any errors.
Is the YDP-101 clear of doors and other movable fixtures?
Move the YDP-101 to an appropriate location.
Does the YDP-101 make a rattling noise when you shake it?
Tighten all screws.
Does the pedal box rattle or give way when you step on the ped-
als?
Turn the adjuster so that it is set firmly against the floor.
Is the pedal cord inserted securely into the socket?
Check the connection.
If the main unit creaks or is otherwise unsteady when you play on
the keyboard, refer to the assembly diagrams and retighten all
screws.
• A voltage selector is provided in some areas.
• Spannungswähler (nur in bestimmten Verkaufsgebieten)
• Un sélecteur de tension est prévu pour certaines régions
• El selector de tensión está provisto para ciertos destinos.
7 8
MSpannungswähler und Netzkabel.
Bevor Sie nun das Netzkabel anschließen, müssen Sie den
Spannungswähler (falls vorhanden) auf die örtliche Netz-
spannung einstellen. Zum Verstellen drehen Sie den Spannungs-
wähler mit einem Schlitzschraubendreher, bis der richtige
Spannungswert (110, 127, 220 oder 240) an der Pfeil-
markierung steht. Bei der Auslieferung werden alle Instrumente
mit Spannungswähler auf “240” voreingestellt.
Nachdem Sie den Spannungswähler auf den richtigen
Spannungswert eingestellt haben, stecken Sie das Netzkabel in
die AC INLET-Buchse und schließen es an eine Steckdose an.
In manchen Gebieten wird ein Steckerdapter mitgeliefert, um
den Anschluß an die evtl. unterschiedlich geformte Steckdose
zu ermöglichen.
Eine falsche Spannungseinstellung kann das YDP-101 schwer be-
schädigen und Funktionsstörungen zur Folge haben.
<Justieren Sie schließlich noch den Höhenvers-
teller.
Zur Stabilisierung ist an der Unterseite des Pedalkastens (C) ein
Höhenversteller vorgesehen. Schrauben Sie den Höhenversteller
heraus, bis er fest auf dem Fußboden steht. Der Höhenversteller
sorgt für stabile Pedalbetätigung und ermöglicht eine präzise
Regelung des Betätigungshubs. Wenn er nicht fest auf dem
Boden steht, können beim Treten der Pedale Klangverzerrungen
auftreten.
Wenn der Zusammenbau beendet ist, prüfen
Sie bitte folgende Dinge:
Sind Teile übrig geblieben?
Gehen Sie den Vorgang des Zusammenbaus noch einmal durch
und korrigieren Sie eventuelle Fehler.
Befindet sich das YDP-101 weit genug von Türen und anderen be-
weglichen Vorrichtungen entfernt?
Bewegen Sie das YDP-101 an einen entsprechend sicheren Ort.
Macht das YDP-101 Klappergeräusche, wenn Sie es schütteln?
Ziehen Sie alle Schrauben fest.
Klappert der Pedalkasten oder gibt er nach, wenn Sie das Pedal
treten?
Drehen Sie den Höhenversteller, bis er fest auf dem Fußboden
steht.
Ist das Pedalkabel fest angeschlossen?
Prüfen Sie die Verbindung.
Wenn die Tastatureinheit knarrt oder beim Spielen wackelt, betrachten
Sie die Abbildungen und ziehen Sie alle Schrauben noch einmal nach.
C
240
127
110
220
132
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YDP-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YDP-101 in the language / languages: Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YDP-101

Yamaha YDP-101 User Manual - English - 48 pages

Yamaha YDP-101 User Manual - German - 47 pages

Yamaha YDP-101 User Manual - French - 47 pages

Yamaha YDP-101 User Manual - Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info